Features
Rotation:CW
Teeth:13
Voltage:12
Starter Type:OSGR
Power Rating:1.4
Number of Holes:2
OE Part Number
Chrysler:56029750AB,60029750AA
Denso:428000-3560
Lester:17995
PIC:190-447A
Arrowhead:SND0539
BBB Ind:17995
Carquest:17995S
TYC:1-17995
Remy Remanufactured:17496
J & N Automotive:410-52253
Denso First Time Fit:280-0358
MPA:19465
NAPA:244-6962
NAPA Pro Series:17995
Rayloc:2446962
Wilson:91-29-5735
Dixie Electric:S-80398
Excel:2683
Andre Niermann:013560
Compatibility Section
Chrysler Aspen 2007-2009 V8 4.7L 1.4KW,CW,12V,13T
Chrysler Aspen 2007-2009 V8 5.7L 1.4KW,CW,12V,13T
Dodge Durango 2006-2009 V8 4.7L 1.4KW,CW,12V,13T
Dodge Durango 2006-2009 V8 5.7L 1.4KW,CW,12V,13T
Fault check
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
