Gas Powered T-Post Driver 2 Stroke Pole Pounder Pile Driver Hammer Portable
Description

Application

It is suitable for a range of piling projects in gardening, road fencing, agricultural fencing, orchard support, geophysical exploration, construction, vegetable planting, fence protection, etc.

  

How to Operation

 

  • First, add the oil mixture to the tank.
  • Install a sleeve of the right size for the pile to be driven.
  • Check that the flame-out switch is in the "-" position.
  • Close the damper when the machine is cold to start, and you can open the damper to start when the machine is hot. Wait for the machine to be normal and then open the damper to use.
  • Press the oil bubble to suck up the oil pipe until the air is eliminated.
  • Start the machine and pull the starter continuously.
  • Set the hand grip to the right position.
  • Add oil to the throttle before working until the engine is normal and you can work when you hear a crisp sound.
  • Start working. Hit the depth you want and stop.
  • Stop working by just turning off the flameout switch to the “0” position.

 

 

 

Specifications

Model: Jh-55

Material: ABS, Iron, Aluminum and Alloy Steel

Color: Red/Blck

Power Source: Gasoline Powered

Starter System: Hand Pull Start

Engine Type: 36*32mm/1.41*1.25in, Single Cylinder, Air Cooling, 2-Stroke

One Function Tool Holder: Sleeve

Impact Frequency: 1200-2200r/Min

Impact Energy: 20-45J

Piling Head Size: φ55mm/2.16in, φ70mm/2.75in

Fuel: Oil Mixture (Gasoline:2-Stoke Engine Oil=25:1)

Fuel Capacity: 0.9L/0.23gal

Fuel Consumotion Rate: ≤0.5L/h(0.13gal/h)

Displacement: 32.6cc

Max. Power and Speed: 0.9kw/8500r/Min

Max. Torque and Speed: 1 .45N.m/5300r/Min

Product Size: 55*27*31cm/21.65*10.62*12.2in

Main Handle Size(L*W): 26*20cm/10.23*7.87in

Secondary Handle Size: 12*15cm/4.72*5.9in

Packing Size: 64.5*34*37cm/25.39*13.38*14.56in

Sleeve Length: 11cm/4.33in

Net Weight: 13kg/28.66lbs

 

Package Included

1* Gasoline Pile Driver

2* Sleeves

1* Proportioning Pot

1* Funnel

1* Tool Bag

1* Strainer

All Needed Accessories

 

 

 

Notes

  • The carburettor must be cleaned after every 100 hours of operation before use. The air filter sponge must be cleaned after 36 hours of operation. The attached manual is universal version for several products, thus the accessories introduced will be slightly different. The product you received is complete. If you have any issue about installation/operation, please contact seller for help.
  • If not used for a long time, the fuel and oil must be cleaned out of the tank and packed in a plastic bag to avoid dust and moisture entering the machine and affecting its use.
  • Pay attention to whether the oil inlet pipe is full of oil before use.
  • After starting up, you need to empty the throttle and let the machine start for a while before starting work.
  • This product cannot be used as a tool for breaking stones.
PushAuction


On Jul 16, 2026 at 19:20:28 PDT, seller added the following information:

Datacaciques