Product at a glance
|
Consistency
NLGI Grade 2
|
Thickener
Lithium complex
|
|
Maximum recommended temperature
140 degrees C / 284 degrees F
|
Appearance
Dark blue grease
|
Product description
Mobilgrease XHP 222 is a high-performance, extended-service lithium complex grease designed for demanding operating conditions. Its adhesive, cohesive formulation is designed to stay in place for longer while providing strong resistance to water contamination, rust, corrosion, wear and extreme-pressure loading.
It is recommended for industrial and marine applications, chassis components and farm equipment. The product is particularly suited to applications exposed to high temperatures, water, shock loading and extended re-lubrication intervals.
Key features and benefits
- Excellent adhesion and cohesion: helps the grease remain in place and can support longer re-lubrication intervals.
- Water washout and spray-off resistance: helps maintain lubrication in wet and water-exposed conditions.
- High-temperature stability: resists thermal, oxidative and structural degradation.
- Anti-wear and extreme-pressure performance: helps protect heavily loaded and sliding components.
- Rust and corrosion protection: supports component protection in hostile aqueous environments.
- Multi-purpose capability: suitable for a broad selection of industrial, automotive, marine and agricultural equipment applications.
Recommended applications
| Industrial equipment | Marine applications |
| Automotive chassis components | Farm equipment |
Typical technical data
| Property | Typical value |
|---|---|
| NLGI grade | 2 |
| Thickener type | Lithium complex |
| Colour | Dark blue |
| Base oil viscosity at 40 degrees C | 220 mm2/s |
| Base oil viscosity at 100 degrees C | 18.6 mm2/s |
| Viscosity index | 94 |
| Dropping point, ASTM D2265 | 290 degrees C |
| Worked penetration, ASTM D217 | 280 (0.1 mm) |
| Four-ball EP weld point, ASTM D2596 | 315 kgf |
| Timken OK load, ASTM D2509 | 40 lb |
| Water spray-off loss, ASTM D4049 | 10 percent |
| Water washout loss at 79 degrees C, ASTM D1264 | 5 percent |
Typical properties are representative values obtained within normal production tolerances and do not constitute a specification. The dropping point is a laboratory property and is not the same as the recommended operating temperature.
Approvals and performance standards
Important information
This listing is for Mobilgrease XHP 222. It is not XHP 222 Special, which is a separate grey-black molybdenum-disulfide grease.
Confirm suitability against the equipment manufacturer's lubrication requirements before use. Do not mix incompatible greases. Clean contaminated or incompatible lubricant from the system where required.
Read the current product information and Safety Data Sheet before handling or use.