• Vehicle Compatibility Information
  • For Acura MDX 2016-2019 V6 3.5L Front Left Updated Design  For Acura MDX 2020-2020 V6 3.5L Front Left   For Honda Passport 2019-2019 V6 3.5L Front Left Auto Trans, 9 Speed Trans; Updated Design  For Honda Passport 2020-2020 V6 3.5L Front Left Auto Trans, 9 Speed Trans  For Honda Passport 2021-2022 V6 3.5L Front Left   For Honda Pilot 2016-2019 V6 3.5L Front Left 9 Speed Trans; Updated Design  For Honda Pilot 2020-2020 V6 3.5L Front Left Auto Trans, 9 Speed Trans  For Honda Pilot 2021-2022 V6 3.5L Front Left Auto Trans
  •  
  • What Are The Signs Of a Failing CV Axle?
  • Front Driver CV Axle Assembly For Honda Passport 3.5L 2019-2022

    Vehicle Compatibility Information

    For Acura MDX 2016-2019 V6 3.5L Front Left Updated Design
    For Acura MDX 2020-2020 V6 3.5L Front Left 
    For Honda Passport 2019-2019 V6 3.5L Front Left Auto Trans, 9 Speed Trans; Updated Design
    For Honda Passport 2020-2020 V6 3.5L Front Left Auto Trans, 9 Speed Trans
    For Honda Passport 2021-2022 V6 3.5L Front Left 
    For Honda Pilot 2016-2019 V6 3.5L Front Left 9 Speed Trans; Updated Design
    For Honda Pilot 2020-2020 V6 3.5L Front Left Auto Trans, 9 Speed Trans
    For Honda Pilot 2021-2022 V6 3.5L Front Left Auto Trans

     

    What Are The Signs Of a Failing CV Axle?

    You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.

     

    The steps and tools needed for an CV axle replacement

    This is a challenging and technical project

    Tool List

    Jack

    Jack stands

    Automotive tool set (pliers, screwdrivers, sockets)

    Pry bar

    Lubricant

    Brake Cleaner

    Hammer or mallet

    Impact wrench (optional)

    CV axle replacement

    Pro Tip
    Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required

    1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.

    Tip: Leave one side assembled while you work on the other so you can remember how things go back together.

    2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.

    3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.

    4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.

    5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.

    6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.

    7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.

     

    Noticed

    -Instruction is not included. Professional installation is recommended

    -Accessories: You will get exactly showing in the picture

    -Please confirm your original part number before purchasing

    -Please Send us a message for anything we can help you with


    Item Specifics
    Brand X-EngineClub
    Manufacturer Part Number X18490301B
    Interchange Part Number HO-8645 HO8645
    OE/OEM Part Number 1700-714063 1700714063
    Manufacturer Warranty 1 Year
    Package Quantity 1 items a lot
    Fitment Type Direct Replacement
    Part Type CV Axle Assembly,CV Axle Shaft
    Compatible Makes Acura, Honda
    Model MDX, Passport, Pilot
    Year 2016-2022
    Engine V6 3.5L
    Location Front Left (Front Driver Side)
    Note For 2016 Honda Pilot fit Elite/ Touring model
    Items Included Nut
    Item Length 26.93"
    Input Shaft Spline Count 31
    Output Shaft Spline Count 30

    Payment

    1.Payment by eBay approved method.

    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    3.Payment must be received within 10 days as auction ended or order might be delayed.

    Shipping

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 30 days to contact us and 10 days to return it from the date it was received. 

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    Contact Us

    You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)

    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    default
    10
    Front Driver CV Axle Assembly For Honda Passport 3.5L 2019-2022

    Vehicle Compatibility Information

    For Acura MDX 2016-2019 V6 3.5L Front Left Updated Design
    For Acura MDX 2020-2020 V6 3.5L Front Left 
    For Honda Passport 2019-2019 V6 3.5L Front Left Auto Trans, 9 Speed Trans; Updated Design
    For Honda Passport 2020-2020 V6 3.5L Front Left Auto Trans, 9 Speed Trans
    For Honda Passport 2021-2022 V6 3.5L Front Left 
    For Honda Pilot 2016-2019 V6 3.5L Front Left 9 Speed Trans; Updated Design
    For Honda Pilot 2020-2020 V6 3.5L Front Left Auto Trans, 9 Speed Trans
    For Honda Pilot 2021-2022 V6 3.5L Front Left Auto Trans

     

    What Are The Signs Of a Failing CV Axle?

    You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.

     

    The steps and tools needed for an CV axle replacement

    This is a challenging and technical project

    Tool List

    Jack

    Jack stands

    Automotive tool set (pliers, screwdrivers, sockets)

    Pry bar

    Lubricant

    Brake Cleaner

    Hammer or mallet

    Impact wrench (optional)

    CV axle replacement

    Pro Tip
    Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required

    1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.

    Tip: Leave one side assembled while you work on the other so you can remember how things go back together.

    2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.

    3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.

    4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.

    5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.

    6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.

    7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.

     

    Noticed

    -Instruction is not included. Professional installation is recommended

    -Accessories: You will get exactly showing in the picture

    -Please confirm your original part number before purchasing

    -Please Send us a message for anything we can help you with

    Item Specifics
    Brand X-EngineClub
    Manufacturer Part Number X18490301B
    Interchange Part Number HO-8645 HO8645
    OE/OEM Part Number 1700-714063 1700714063
    Manufacturer Warranty 1 Year
    Package Quantity 1 items a lot
    Fitment Type Direct Replacement
    Part Type CV Axle Assembly,CV Axle Shaft
    Compatible Makes Acura, Honda
    Model MDX, Passport, Pilot
    Year 2016-2022
    Engine V6 3.5L
    Location Front Left (Front Driver Side)
    Note For 2016 Honda Pilot fit Elite/ Touring model
    Items Included Nut
    Item Length 26.93"
    Input Shaft Spline Count 31
    Output Shaft Spline Count 30


    1.Payment by eBay approved method.

    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    3.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 30 days to contact us and 10 days to return it from the date it was received. 

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)


    All rights reserved.