Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Application:
| Make&Model | Year | Note |
|---|---|---|
| For Acura TSX | 2009-2014 | All Models |
| For Honda Accord | 2008 | EX, EX-L, Sedan - LX, LX-P, LX-S |
| For Honda Accord | 2009-2017 | All Models |
OE/Part number:
Rear Brake Disc:S-31479,S31479,31479
Rear Brake Pads:P-1336,P1336,1336,D1336,D1451,P-1451,P1451,1451
Specification:
Condition: New
Placement on Vehicle: Rear, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
- Brake Rotors
| Rear Dirver & Passenger Side | |
| Material | G3000 |
| Solid Or Vented Type Rotor | Solid |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 5+2+2 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 282 (11.10 inch) |
| Overall Height(mm) | 48.7 |
| Nominal Thickness(mm) | 9 |
- Brake Pads
| Rear Dirver & Passenger Side | |
| Fitment | Direct Replacement |
| Backing Material | Steel |
| Pad Material | NAO Ceramic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 93.6 (±0.3) |
| Inner Pad Height(mm) | 46.64 (±0.3) |
| Inner Pad Thickness(mm) | 14.1 (-0.5) |
| Outer Pad Width(mm) | 93.6 (±0.3) |
| Outer Pad Height(mm) | 46.64 (±0.3) |
| Outer Pad Thickness(mm) | 14.1 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Rear Drilled and Slotted Brake Rotors
4x Rear Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.
● .

OTHER ITEMS
>>you might also like
-
Cargo Security Cover Luggage Cover for Lincoln MKC 2015-2019 Privacy Protection
-
80mm Throttle Body For Dodge Challenger Durango Chrysler 300 Ram 2500 53034251AC
-
N20B20 Cylinder Gasket Kit For BMW E84 X1 xDrive/sDrive20i 28i 2.0T 12-15
-
HSS Cobalt Silver and Deming Drill Bits Set 9/16 inch to 1 inch W/ Storage Case
-
1pc Front Lower Control Arm With Bushing For 1999 2000- 2004 Jeep Grand Cherokee
-
12V 9 Teeth Starter Motor for Yamaha WR450F 2007-2015 SMU0455 Clockwise
-
Aluminum Engine Radiator for Ford F-100 F-250 1970-1979 D0TA8005AB CU397
-
K04 TurboCharger for Mazda CX-7 CX7 2.3 2006-2010 DISI NA Engine 53047109901
-
Front Drive Shaft Prop Shaft Driveshaft for Dodge Ram 2500 3500 Diesel 2003-2013
-
Class 4 Trailer Hitch for 2022-2026 Toyota Tundra 2in Tube 1800lbs TW
-
Water Pump for Honda CR-Z 1.5L Insight 1.3L 2010-2016 19200RBJ003 AW6688
-
Arch Trim Front for Buick Encore 1.4L 2013-2022 95275468 95275469 Black Pair
