Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Application:
| Make&Model | Year | Note |
|---|---|---|
| For Nissan Cube | 2009-2014 | All Models |
| For Nissan Sentra | 2007-2008 | Base, S, SL |
| For Nissan Sentra | 2009-2012 | Base, S, SL, SR |
| For Nissan Versa | 2007-2008 | 2008: Non-ABS |
| For Nissan Versa | 2009-2012 | 1.8L Models |
OE/Part number:
Front Brake Disc:31463,S31463,S-31463
Front Brake Pads:P-815A,P815A,D815A
Specification:
Condition: New
Placement on Vehicle: Front, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
- Brake Rotors
| Installation position | Front Dirver & Passenger Side |
| Material | G3000 Iron Alloy |
| Solid Or Vented Type Rotor | Vented |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 4 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 279.8 |
| Overall Height(mm) | 44 |
| Nominal Thickness(mm) | 24 |
- Brake Pads
| Installation position | Front Dirver & Passenger Side |
| Fitment | Direct Replacement |
| Backing Material | Steel |
| Pad Material | Semi Metallic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 137.2 (±0.3) |
| Inner Pad Height(mm) | 54.2 (±0.3) |
| Inner Pad Thickness(mm) | 16.3 (-0.5) |
| Outer Pad Width(mm) | 137.2 (±0.3) |
| Outer Pad Height(mm) | 54.2 (±0.3) |
| Outer Pad Thickness(mm) | 16.3 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Front Drilled and Slotted Brake Rotors
4x Front Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.
● .
OTHER ITEMS
>>you might also like
-
4x Oil Filter for Audi A3 A4 VW Golf Jetta 1.8T 2.0T HU6002Z 06L115562B
-
2 Pcs Coil Spring Front Mount Camber Plates for Toyota Celica 2000-2006
-
4 Front & Rear ABSWheel Speed Sensor For Toyota Camry 2002-2011 Solara 2004-2008
-
Power Steering Pump For Honda Accord L4 2.4L 2003 2004 2005 56100-RAA-A01RM
-
Running Board for Jeep Wrangler JK 4 Door 2007-2018 Nerf Bars Black Left&Right
-
Oil Pan for Eagle Talon 1995-1998 2.0L M04777335 Direct Fit Replacement
-
6pcs Front Rear Struts & Sway Bar Link For Hyundai Elantra Sedan 2007-2010 5622
-
Trailing Control Arm Brace for 1968-1972 Chevelle Buick Skylark for GM A Body
-
Complete Power Steering Rack & Pinion for Hyundai Elantra 09-12 565001M100
-
Engine Coolant Radiator & AC Condenser for Buick LaCrosse 3.6L 2017-2019 8013574
-
1x Bucket Cylinder Replacement For Bobcat Grapple Various Models 6586700 New
-
Engine Water Pump Circulation for Detroit Diesel Mercedes Benz 9062006301
