Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Application:
For Honda Accord 1998-2002 Sedan 2.3L Only; 4-Lugs
OE/Part number:
Front Brake Disc:31243,S31243,S-31243
Front Brake Pads:D465A,465A,P-465A,P465A
Specification:
Condition: New
Placement on Vehicle: Front, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
- Brake Rotors
| Installation position | Front Dirver & Passenger Side |
| Material | G3000 Iron Alloy |
| Solid Or Vented Type Rotor | Vented |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 4+2+2 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 259.8mm/10.23 in. |
| Overall Height(mm) | 47 |
| Nominal Thickness(mm) | 23 |
| Bolt Diameter(mm) | 4-φ12.6 |
| Hub Holes Centering Diamete(mm) | 64 |
- Brake Pads
| Installation position | Front Dirver & Passenger Side |
| Fitment | Direct Replacement |
| Backing Material | Steel |
| Pad Material | NAO Ceramic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | Yes |
| Pad Wear Sensor Type | Mechanical Sear Sensor |
| Inner Pad Width(mm) | 137.8 (±0.3) |
| Inner Pad Height(mm) | 52.07 (±0.3) |
| Inner Pad Thickness(mm) | 15.8 (-0.5) |
| Outer Pad Width(mm) | 137.8 (±0.3) |
| Outer Pad Height(mm) | 52.07 (±0.3) |
| Outer Pad Thickness(mm) | 15.8 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Front Drilled and Slotted Brake Rotors
4x Front Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.

OTHER ITEMS
>>you might also like
-
Engine Water Pump Satin Aluminum For Chevy Big Block BBC 396 402 454 502
-
Power Steering Shaft Replacement For Jeep Cherokee 1984-1994 237.AM8686
-
D127519 Brake Master Cylinders For Case Backhoe 480D 580D 580SE 580E 580G
-
Front Complete Strut w/ Control Arm Assembly For 12-13 Nissan Rogue 14-15 Select
-
Performance Spark Plugs for Audi SQ5 V6 3.0L 2019-2020 SILKGR9A7ES 6PCS
-
Aluminum Running Boards for Mercedes-Benz GL450 X164 07-12 Step Rails Nerf Bars
-
Transfer Case Shift Motor for Ford Ranger Mazda B2300 B2500 B3000 B4000 New
-
Front Left Window Regulator w/ Motor for Buick Lucerne 06-11 741146
-
Polycarbonate Headlamp Lens for BMW X5 F15 X6 F16 2014-2018 Clear Front Set
-
Master Window Switch Driver Door Left For Dodge Journey 2011-2016 DWS1893 new
-
Ignition Coil Harness for Kia Sorento LX EX 2003-2006 3.5L 3961039400
-
Rear LH Power Hatch Lift Support Strut for Ford Police Interceptor Utility 16-19
