Notice: Please double-check the OE number before purchase. You can verify it by providing the last 8 digits of your VIN to any local authorized dealer.
Application:
| Make&Model | Year | Note |
|---|---|---|
| For Toyota Camry | 2002-2004 | 4 Cyl - w/ Rear Disc Brakes- Japan & USA Built; 4 Cyl - w/ Rear Drum Brakes; 6Cyl - Japan & USA Built |
| For Toyota Camry | 2005-2006 | 2.4L, 3.0L LE; Japan & USA Built |
OE/Part number:
Front Brake Disc:S-31050,S31050,31050
Front Brake Pads:P-908,P908,908,D908
Specification:
Condition: New
Placement on Vehicle: Front, Left, Right
Instruction Included:Yes
Produced under an IATF 16949 quality management system
✔ Tested in accordance with relevant performance and durability requirements
✔ Strict quality inspection for dimensional accuracy and material consistency
Product size:
- Brake Rotors
| Front Dirver & Passenger Side | |
| Material | G3000 |
| Solid Or Vented Type Rotor | Vented |
| Rust Resistant Coating | Anti-rust oil treatment |
| Directional or Non-Directional Brake Surface |
Directional |
| ABS Tone Ring Included | No |
| Bearings Included | No |
| Mounting Bolt Hole Quantity | 5+2 |
| Mounting Bolt Hole Circle Diameter(mm) | 114.3 |
| Outside Diameter(mm) | 275 (10.83") |
| Overall Height(mm) | 49.4 |
| Nominal Thickness(mm) | 28 |
- Brake Pads
| Front Dirver & Passenger Side | |
| Fitment | Direct Replacement |
| Backing Material | Steel |
| Pad Material | NAO Ceramic |
| Pad Shims Included | Yes |
| Mounting Hardware Included | Yes |
| Mounting bolt | No |
| Lubricant Included | Yes |
| Pad Wear Sensor Included | No |
| Pad Wear Sensor Type | / |
| Inner Pad Width(mm) | 131.57 (±0.3) |
| Inner Pad Height(mm) | 58.4 (±0.3) |
| Inner Pad Thickness(mm) | 16.7 (-0.5) |
| Outer Pad Width(mm) | 131.57 (±0.3) |
| Outer Pad Height(mm) | 58.4 (±0.3) |
| Outer Pad Thickness(mm) | 16.7 (-0.5) |
Note on Initial Brake Noise
- Common Causes:
① New pads and rotors not fully bedded, causing uneven contact.
② Before anti-rust coating on rotors wearing off, may cause slight hissing.
③ Thin surface rust forms on rotors overnight in humid conditions, resulting in a squeak during initial braking.
- Resolution:
Noise will naturally disappear after 200–500 miles of normal driving. Avoid hard braking during this period.
Package included:
2x Front Drilled and Slotted Brake Rotors
4x Front Brake Pads w/Hardware
Features:
● Heat dissipation cuts thermal fade for stable braking
● Lightweight build enhances handling & responsiveness
● Reduce noise for quiet & smooth braking
● Shorter stopping distance in emergencies
Notice:
● New installed, if noise, it takes hundreds of miles to run in.
● If shaking, usually not installed correctly, try to instal again
● Please confirm your vehicle condition and OE number before placing an order!
● Please note that this is an after-sales part, not an original part.
● We suggest that you seek professional installation to avoid unnecessary trouble.
● .

OTHER ITEMS
>>you might also like
-
Complete Coilover Kits for Honda CR-V 1996-2001 Adj. Height Shock Absorbers
-
LED Third Brake Stop Light Tail Lamp For Ford Transit-150 Transit-250/350 18-19
-
Power Steering Rack and Pinion for GMC Canyon RWD Z71 2006-2012 22-1041
-
Sun Visors for Chevy Silverado GMC Sierra Cadillac Escalade 2007-2014 15213272
-
Qulified Super Duty Dashboard Cup Holder For Ford F250/F350/F550 2008-2016
-
Engine Valve Cover for Toyota Avalon RAV4 Sienna 3.5L V6 2005-2018 11202-0P020
-
Rear Trailing Arm Kit for GMC Yukon XL Avalanche 2000-2014 Powder Coated Steel
-
Full Set Front Rear Air Suspension Struts Fit Jaguar XJ-Series XJ8 XJR 04-
-
MaXpeedingrods Coilover Suspension Lowering Kit fit Honda Prelude 1992-2001
-
Aluminum Radiator for Infiniti QX56/Nissan Armada/Titan 5.6L 2004-2015 CC2691
-
4Pcs Fuel Injectors Set for Mazda Protege 2.0L 2001-2003 84212245 4 Hole
-
Front Lower Right Rearward Control Arm Ball Joint for BMW 540i M5 1997-03
