• Vehicle Compatibility Information:
  • For INFINITI for G25 2011-2012 V6 2.5L Front Left AWD For INFINITI for G35 2007-2008 V6 3.5L Front Left AWD, VQ35HR Engine For INFINITI for G37 2009-2013 V6 3.7L Front Left AWD, Sedan For INFINITI for G37 2013 V6 3.7L Front Left X Model, Sedan
  •  
  •  
  • What Are The Signs Of a Failing CV Axle?
  • You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.
  •  
  • The steps and tools needed for an CV axle replacement

    • Front Driver CV Axle Assembly for Infiniti for G37 2013 V6 3.7L X Model Sedan

    Vehicle Compatibility Information:

    For INFINITI for G25 2011-2012 V6 2.5L Front Left AWD
    For INFINITI     for G35 2007-2008 V6 3.5L Front Left AWD, VQ35HR Engine
    For INFINITI     for G37 2009-2013 V6 3.7L Front Left AWD, Sedan
    For INFINITI     for G37 2013 V6 3.7L Front Left X Model, Sedan

     

     

    What Are The Signs Of a Failing CV Axle?

    You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.

     

    The steps and tools needed for an CV axle replacement

    This is a challenging and technical project

    Tool List

    Jack

    Jack stands

    Automotive tool set (pliers, screwdrivers, sockets)

    Pry bar

    Lubricant

    Brake Cleaner

    Hammer or mallet

    Impact wrench (optional)

    CV axle replacement

    Pro Tip
    Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required

    1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.

    Tip: Leave one side assembled while you work on the other so you can remember how things go back together.

    2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.

    3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.

    4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.

    5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.

    6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.

    7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.

     

    Noticed

    -Instruction is not included. Professional installation is recommended

    -Accessories: You will get exactly showing in the picture

    -Please confirm your original part number before purchasing

    -Please Send us a message for anything we can help you with


    Item Specifics
    Brand X-EngineClub
    Manufacturer Part Number X17957701B
    ABS Ring Included No
    Axle Boot Material Neoprene
    Axle Nut Hex Size 1.38 in / 35 mm
    Axle Nut Included Yes
    Axle Nut Locking Type Split Pin
    Axle Nut Thread Size M24 x 1.5
    Boot Color Black
    Cotter Pin Included No
    Fitment Type Direct Replacement
    Grease Type Molybdenum Disulfide Lithium Grease
    Hardware Included No
    Hazardous Material No
    Inboard Clip Included No
    Input Shaft Connection Style Bolt-On
    Placement on Vehicle Front Left
    Number of Outboard Splines 27 Teeth
    Output Shaft Connection Style Spline
    Overall Compressed Length 24.67 in / 626.5 mm
    Shaft Material 40CR
    Surface Finish Black Coating
    Manufacturer Warranty 1 Year
    Interchange Part Number 66-6283
    Fitment Verify this part fits your vehicle using the compatibility chart
    Package Quantity 1

    Payment

    1.Payment by eBay approved method.

    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    3.Payment must be received within 10 days as auction ended or order might be delayed.

    Shipping

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    Returns

    1. You have 30 days to contact us and 10 days to return it from the date it was received. 

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    Contact Us

    You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)

    Shop Category
     Store Home
     Turbocharger
     Ignition Coil
     Spoilers
     Body kits
     Window Motors & Regulators
     Axle Housings & Parts
     Electric Motor
     Window Mouldings
     Rocker Panels
     Complete Strut
     Struts & Suspension Kit
     Brake Calipers
     CV Axle
     throttle body
     Shocks & Struts
     Headlight Assembly
     fuel injector
     thermostat
     Other
    Hot Item
    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    default
    10
    Front Driver CV Axle Assembly for Infiniti for G37 2013 V6 3.7L X Model Sedan

    Vehicle Compatibility Information:

    For INFINITI for G25 2011-2012 V6 2.5L Front Left AWD
    For INFINITI     for G35 2007-2008 V6 3.5L Front Left AWD, VQ35HR Engine
    For INFINITI     for G37 2009-2013 V6 3.7L Front Left AWD, Sedan
    For INFINITI     for G37 2013 V6 3.7L Front Left X Model, Sedan

     

     

    What Are The Signs Of a Failing CV Axle?

    You may notice a clicking sound when turning the wheel or accelerating and feel a vibration as the vehicle is in motion. You may also notice grease on the inside of your wheels or tires as the lubricant leaks out from a damaged CV boot.

     

    The steps and tools needed for an CV axle replacement

    This is a challenging and technical project

    Tool List

    Jack

    Jack stands

    Automotive tool set (pliers, screwdrivers, sockets)

    Pry bar

    Lubricant

    Brake Cleaner

    Hammer or mallet

    Impact wrench (optional)

    CV axle replacement

    Pro Tip
    Additional specialized tools such as tie-rod end pullers, ball joint removers, and vehicle-specific sockets may be required

    1. Slightly loosen the wheel lug nuts. Raise and secure the vehicle. Remove the wheels. Remove the cotter pin. Unlock the spindle nut safety fastener according to the repair manual instructions.

    Tip: Leave one side assembled while you work on the other so you can remember how things go back together.

    2. Loosen the nut with a proper socket and breaker bar. Another bar or large screwdriver wedged between the lug nuts can help hold the wheel in place. Brake application simplifies the wheel turn issue.

    3. On some vehicles, the brake caliper and rotor must be removed before proceeding. Refer to your repair manual for your vehicle's requirements. If you find yourself having to remove the brake caliper, suspend it from a point on the fFor Rame or wheel well with a length of coat hanger wire so it doesn't hang from its brake hose.

    4. Remove the cotter pin and castle nut from the lower ball-joint. Disconnect the ball-joint from the steering knuckle with a removal tool (your pickle fork is likely to come in handy here). Swing the knuckle and hub outward to free the outboard axle assembly.

    5. Gently wedge a pry bar or a large flat blade screwdriver between the axle and transmission. Carefully pry the axle assembly away from the transmission. Be careful not to damage any transmission seals.

    6. The drive axle assembly should now slide right out. Take a good look at the drive assembly location, and then remove. The new one will go back the same way.

    7. Grease the splines before insertion with gear grease. Insert the replacement drive axle assembly and reverse the disassembly process. Torque all fasteners to specification. Don't forget to use new cotter pins.

     

    Noticed

    -Instruction is not included. Professional installation is recommended

    -Accessories: You will get exactly showing in the picture

    -Please confirm your original part number before purchasing

    -Please Send us a message for anything we can help you with

    Item Specifics
    Brand X-EngineClub
    Manufacturer Part Number X17957701B
    ABS Ring Included No
    Axle Boot Material Neoprene
    Axle Nut Hex Size 1.38 in / 35 mm
    Axle Nut Included Yes
    Axle Nut Locking Type Split Pin
    Axle Nut Thread Size M24 x 1.5
    Boot Color Black
    Cotter Pin Included No
    Fitment Type Direct Replacement
    Grease Type Molybdenum Disulfide Lithium Grease
    Hardware Included No
    Hazardous Material No
    Inboard Clip Included No
    Input Shaft Connection Style Bolt-On
    Placement on Vehicle Front Left
    Number of Outboard Splines 27 Teeth
    Output Shaft Connection Style Spline
    Overall Compressed Length 24.67 in / 626.5 mm
    Shaft Material 40CR
    Surface Finish Black Coating
    Manufacturer Warranty 1 Year
    Interchange Part Number 66-6283
    Fitment Verify this part fits your vehicle using the compatibility chart
    Package Quantity 1


    1.Payment by eBay approved method.

    2.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    3.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 30 days to contact us and 10 days to return it from the date it was received. 

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    You may contact us via message if you have any questions and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays)


    All rights reserved.