
Application:
for Kia Forte LX L4 2.0L 2017-2018
for Kia Forte S L4 2.0L 2017-2018
OE/Part number:
FG2334, 31110B0500, 31110B0600
Specification:
Condition: Brand New
Type: Fuel Pump Assembly
Drive Type: Electrical
Fuel Type: Petrol
Voltage(V): 12
Flow Rate(Gallons/Hour): ≥41G/H
Pressure(MPa): 0.3
Inlet Quantity: 1
Inlet Size:Ф8.6
Outlet Type: SAE J2044 2099
Outlet Quantity: 1
Outlet Size:Ф7.89
Material: Plastic(POM)
Housing Material: Plastic
Fuel Sending Unit Included: Yes
Fuel Pressure Sensor Included: Yes
Fuel Level Sensor Included: Yes
Float Included: Yes
Fuel Reservoir Included: Yes
Fuel Strainer Included: Yes
Seal Ring Included : No
Internal Or External Strainer: Internal
Placement on Vehicle: Rear (Fuel Tank)
Package included:
1X Fuel Pump Module Assembly
(as shown in the pictures)
Feature:
Fuel Pump Assembly Product Characteristics:
1.High-precision automotive grade fuel tank pressure sensor
(CMOS technology and MEMS hybrid technology, modular design, waterproof and dustproof, -40~125°C zero drift, 2% FSO precision measurement, 1ms extremely fast response, to ensure the national six emission standards.)
2.Dual-channel long-life level sensor
(Dual-channel dual-contact design, more stable and longer life.
HERAEUS conduction tape, Dupont resistance, laser cutting process, liquid level
display is more accurate.)
3.Low level design
(The minimum tank liquid level of 10mm still continuously maintains the fuel supply pressure to ensure the safety of driving at low liquid levels.)
4.High dust holding layer filter
(Nylon skeleton one-time injection molding process, low temperature resistance, low resistance, high toughness, long life.
Imported SEFAR mesh fabric, dust holding capacity of 575g/㎡, 60μm particle filtration efficiency of more than 90%.)
5.Platform R&D
(Patented products, standardized design, data and OE are fully interoperable, good stability, high recognizability, low noise, and work efficiency increased by 20%.)
Testing:
100% Fuel Level Sensor Testing
100% Fuel Pump Assembly Drop Test
100% Fuel Pump Assembly Noise Test
100% Durability Test of Fuel Ppump Assembly
100% Fuel Pump Assembly Air Tightness Test
Certifications:
CE
IATF16949
IOS14001
Note:
Common problems and solutions of fuel pump assembly:
1) Gasoline pump aging: Over time, the internal components of the gasoline pump will gradually wear out, leading to a decrease in pump performance and ultimately resulting in the inability to start.
Solution: Replace the gasoline pump with a new one, ensure to choose a gasoline pump that matches the original vehicle model, and follow the correct installation steps.
2) Circuit malfunction: The operation of the gasoline pump relies on a stable voltage supply. If there are short circuits, open circuits, or poor contacts in the circuit, it may cause the gasoline pump to malfunction.
Solution: Check if the circuit connections are secure and reliable, repair or replace damaged circuit components.
3) Fuel quality issues: Using inferior fuel or fuel containing impurities may cause gasoline pump blockage or increased wear.
Solution: Use high-quality fuel, choose regular gas stations to purchase fuel, and avoid using inferior fuel or fuel containing impurities.
4) Oil level sensor malfunction: The sliding resistor of the oil level sensor is contaminated and corroded, resulting in poor contact between the resistor and the sliding elastic contact.
Solution: Replace the gasoline sensor component.
5) Gas blockage in the gasoline system pipeline: When the fuel tank is running low on fuel or when the temperature is too high in summer, the oil vapor in the pipeline forms a gas blockage. Solution: Wait for the car to cool down for a period of time before restarting, or go to a flat road for a test drive or refueling check.
6) Insufficient pressure: If it is difficult to start the car in the morning or after parking for 1 hour, it may require multiple ignitions to start, which may be due to insufficient pressure in the gasoline pump.
Solution: Check the pressure regulating valve of the gasoline pump. If the pressure is released, the gasoline pump needs to be replaced.
7) Motor malfunction: The most common issue is when the car is parked properly, but it fails to start when driving again. This may be caused by the carbon brush of the gasoline pump motor getting stuck.
Solution: Try tapping and shaking the fuel tank with a wooden stick while starting the car. If successful, it is recommended to check and replace the gasoline pump in a timely manner to avoid breaking down on the road.
OTHER ITEMS
>>you might also like
-
Trunk Electric Support Rod Struts For Audi RS Q8 SQ8 2019-21 3.0L 4.0L 19-2021
-
Pair Front Quick Complete Struts w/Coil Spring for 2006-2008 Dodge Ram 1500 4WD
-
Control Arm Ball Joint Sway Bar Link Tie Rod End Kit for KIA Soul EV 2015-2019
-
K04 Turbo Turbocharger For Mazda CX7 CX-7 2.3L 2006-2010 L3K913700E K0422-882
-
Axle Actuator for Audi A3 Q2 Seat Altea Cordoba Ibiza 12471631 600103 4WD Front
-
Lifters Hydraulic Camshaft Timing for Dodge Durango 5.7L 53021726AE 53021726AD
-
Left Front Lower Control Arm Bushing for Mazda 6 2009-2013 K622045 w/ Ball Joint
-
Fuel Filler Neck Assembly for Ford F350 Super Duty 6.8L 1999-2004 FN786
-
Turboots RHV4 VB23 Turbochar For TOYOTA Land Cruiser 200 series 405L 17208-51010
-
Climate Control Module for Jeep Grand Cherokee 2002-2004 P55115904AC 599-226
-
Engine Cooling Radiator Support for Honda Civic 22-25 71413-T20-A00 Complete Set
-
Aluminum Radiator for Honda Odyssey 2011-2017 AT Transmission CU13208 DPI13208
