Panel mount Compatible With Powerpole PP75 75A connector pair, this fits the PP75 housings.  Fits in a 2" hole for easy install with a common sized hole saw or panel punch, has two holes for panel fastening using screws, rivets, etc.  There is a hole for fastening the connector through the mount for securing it in place, i recommend 1.5"  machine screws and nuts to fasten it into the mount (not included).  The connector is a snug fit in the mount to prevent rattling and movement but the screw will prevent connection force from pushing it out of the mount.  The face of this mount is 3" in diameter and the mounting holes are spaced 2.5" center to center.  The mounting holes are 1/8" in diameter but can be drilled larger if needed, i generally use 1/8" pop rivets or #6 screws for mounting. (Connectors and wire are not included, shown for demonstration purposes only.) The default color i make these is Black, however many other colors are available!  If you have a special need or want for one in a different color just contact me for color availability.  I can also provide other colors not in stock with a slight lead time, usually 4-5 days, to obtain whatever color you desire.