Product Description：
and
Made of - materials,
Small solar controller
A 12V, 24V automatic identification
A dual MOS anti-backflow circuit, ultra-low heat generation A built-in over-current/short-circuit for protection, reverse connection for protection
All are automatically restored without damaging the controller.
Complete 3-stage for PWM charging management
Suitable for solar power generation s, smart homes, solar chargers, solar ventilation s, solar light boxes, solar billboards, solar lights, .
Multiple for protection measures, built-in over-current, short-circuit for protection, reverse connection for protection, open-circuit for protection, all of which are automatically restored without damaging the controller
Light control time and space, this controller has light control time control, can control the discharge through sunlight and time
Three-stage for PWM regulation charging adopts direct charge, for Boost charge, and floating charge three-stage for PWM regulation charging . Using the controller is the efficient and fast intelligent charging and effectively prolongs the service life of the
Menu key: Used to switch the parameter display interface, or long press for 5s to enter or exit the parameter setting.
Scroll up: In the parameter setting interface, lightly press once to increase the parameter by level.
Scroll down: In the parameter setting interface, tap once to decrease the parameter by level.
Browse interface: Short press the menu key to cycle through the interfaces and parameters.
Setting parameters: In interface 2-5, long press the up key for 5 seconds to restore the default value, long press the menu key for 3 seconds to enter the manual setting, at this time the number will flash, press the up and down keys to adjust the parameter value, and 3s after completion, exit the setting.
Product specifications:
voltage: 12V/24V automatic
Rated charging current: 10A 20A 30A 40A 50A 60A
Rated discharge current: 10A -60A
The highest photovoltaic voltage 10A-30A: 12V <23V/24V v46V
40A-60A: 12V <25V/24V v50V
for Boost charging voltage: bl sealed type b2 colloidal type b3 open type
14.4V 14.2V 14.6V
Floating voltage: 10A-30A: 13.7 (default value, adjustable range: 12.7V-15V)
40A-60A: bl/14.4V, b2/14.2V, b3/14.6V (adjustable range: 13V-15V)
Discharge cut-off voltage: 10A-30A: 10.7V, (default value, adjustable range: 9V-11.3V)
40A-60A :10.7V, (adjustable range: 9.5V-11V)
Discharge recovery voltage: 10A-30A: 12.6V, (default value, adjustable range: 11.5V-13V)
40A-60A :12.6V, (adjustable range: 11.5V-13V)
USB output: 2 USB outputs, maximum 5V/2A
Standby current: <10mA
Working temperature: -35℃-+60℃
Package list:
solar charge controller*1
User Manual*1
Note:
*Only suitable for lead-acid batteries
*Due to manual measurement, please allow an error of 1-5mm.
Since the monitors are not calibrated the same, the colors of the items shown in the photos may be slightly different on your computer monitor.
