| ⚡ 1500W–3000W | 🔥 120Nm Torque | 🔋 48V / 60V / 72V |
| ⚙️ 3T Winding | 🌡️ PTC Temperature Sensor | 🔒 Dual Hall Sensors |
- ⚡ Model: MXUS 3K Turbo XF40 V3
- ⚙️ Type: DDR-3K
- ⚙️ Construction: Gearless Direct Drive
- ⚡ Rated Power: 1500W–3000W
- 🔋 Rated Voltage: 48V / 60V / 72V
- ⚙️ Winding: 3T
- 🔥 Torque: Approx. 120Nm
- ⚡ Efficiency: Approx. 83%
- ⚖️ Weight: Approx. 10kg
- 🛞 Wheel Compatibility: 20"–28"
- 🚀 Rated Speed: 60–70km/h
- 🧲 Magnet Poles: 23 Pairs / 46 Pole
- 🧲 Magnetic Steel: H45
- 🔩 Dropout Width: 142mm
- 🌡️ Temperature Sensor: PTC
- 🛑 Brake Type: Disc Brake Compatible
- ⚙️ Freewheel Compatibility: 1 Speed / 6 Speed
- 🌡️ Operating Temperature: -20°C to 45°C
- 🔌 Cabling Route: Shaft Side Left
- 🔇 Noise Grade: ≤55dB
- 🧪 Salt Spray Test Standard: 24 / 96 Hours
- 🔌 Approx. 1.1 metre motor cable length
- 🔌 Available with 6mm ring terminal connections
- 🔌 Available with XT150 face bullet connector connections
- 🔒 Dual Hall Sensor Design
- ✔️ Only one hall sensor is required during normal operation
- ✔️ Second hall sensor acts as a spare backup for extra reliability
- ✔️ MXUS 3K Turbo XF40 V3
- ✔️ 3T Winding
- ✔️ Approx. 120Nm Torque
- ✔️ Double Hall Sensor Design
- ✔️ Built-In PTC Temperature Sensor
- ✔️ Gearless Direct Drive Motor
- ✔️ Disc Brake Compatible
- ✔️ Suitable for 20"–28" wheels
- ✔️ Freewheel Compatible
- ✔️ Left Side Cable Exit
- ✔️ High Performance H45 Magnetic Steel
- ✔️ Low Maintenance Gearless Construction
- ✔️ 1 × MXUS 3K Turbo XF40 V3 Hub Motor
✔️ Every motor is fully tested twice before dispatch to ensure correct operation before delivery.
✔️ Each motor undergoes a two-stage quality control inspection to check general operation, hall sensor function and overall performance before being shipped.
✔️ This helps ensure the motor arrives fully tested and ready for correct installation.
Motor only.
Rim, spokes, tyre, freewheel, controller, display, battery, brake rotor and installation hardware are not included unless otherwise stated.
Performance figures may vary depending on wheel size, voltage, controller settings, rider weight, setup and riding conditions.
Product Type: Replacement Brushless Hub Motor
This product is intended as a replacement electrical component and should only be installed by a competent person with suitable mechanical and electrical knowledge.
- ⚠️ Always inspect components before installation and use.
- ⚠️ Ensure all fasteners, torque arms and braking systems are suitable for the application.
- ⚠️ Follow suitable installation procedures.
- ⚠️ Wear appropriate safety equipment during operation.
- ⚠️ Keep electrical connections clean, secure and protected from damage.
- ⚠️ Do not modify electrical wiring unless suitably qualified.
- ⚠️ Periodically inspect the motor, axle, fasteners and associated components for wear or damage.
- ⚠️ This product should not be used if damaged, incorrectly installed or showing signs of abnormal operation.
The purchaser is responsible for ensuring compatibility, correct installation, safe operation and compliance with any applicable local laws and regulations.
E-Bike Power UK® accepts no liability for injury, damage, loss or legal consequences resulting from incorrect installation, modification, misuse or operation of any product supplied.
- 📦 Orders dispatched within 24 hours Monday–Friday when ordered before 1PM
- 🚛 Fully tracked delivery service
- ⏱️ Estimated delivery 1–2 working days
- ↩️ 30 day returns policy
- 📦 Item must be returned unused, unfitted and in original condition
If you have any questions before purchasing, please send us a message via eBay and we'll be happy to help.
We aim to respond to all messages within 24 hours Monday–Friday.