When using the art resin, there are some tips for you of resin epoxy kit.

1. Before diy epoxy resin kit, please read the complete operation guide and video.

2. The resin and hardener mixed in a 1:1 ratio must be measured by volume rather than weight.

3. Stir epoxy resin slowly and thoroughly uniform until art resin becomes clear(stirring too fast can cause bubbles).When epoxy resin becomes smooth((watery status),pour it into the model to ensure sufficient self-leveling

The detail steps resin epoxy kit when making the epoxy resin

1

Measure 1:1 by volume

Measure 1:1 ratio (by volume),then pour clear epoxy resin together into a container.

1

Stir in the same direction

Stir slowly art resin in one direction until no swirls are seen at all. Scrape the sides and bottom thoroughly.

1

Pour sequins or pigment

Stir thoroughly until the color is even in the resin, and quickly pour art resin into model.

1

Pour resin in model

The thin the resin, the better self equal effect.To get a excellent, clear and sturdy epoxy look Perfect resin epoxy kit. Epoxy resin crystal clear

Creat your imagination of resin epoxy kit,using the art resin to creat whatever you want!!!

1

Multi-Application keychain

our epoxy kit is ideal for clear coating and artwork, wood, glass-like, and crystal clear finish.best resin epoxy kit.

1

Crystal Clear domino model

It cures a perfectly art resin, high performance and Crystal clear! Our resin epoxy hard as a rock.Gorgerous clear resin.Recommend resin kit.

1

Excellent for kids

Using the epoxy kit to create a meaningful for birthday, anniversary, and will be turn out beautiful and treasured forever.Perfect for beginner resin kit.

You can get most beautiful arts when you using epoxies resin?

1

For bag

Best resin epoxy kit for beginner resin kit.epoxy and resin ,resin kit with resin,epoxy resin crystal clear.resin and hardener

1

For Coaster

Gorgerous epoxy resins for jewelry making resin kit.art resin of the resin epoxy clear.casting resin kit,beginner epoxy resin

1

For Tables

Perfect epoxy art resin ,epoxy resin ,resin kit clear,beginner resin kit,resin kits.

1


1
Reasons to choose epoxy resin.

Reasons to choose this UV resin. Epoxy resin is satisfied with a wide range of people from expert to beginners of resin.Suitable for jewelry making, River Tables, casting and coating etc.

Package of epoxy resin kit:

  • 1 * 16OZ resin+16OZ hardener
  • 2 x Gloves
  • 4 x Mixing Sticks
  • 1 x Instruction
  • 2 x Measuring Cups

Features of epoxy resin：

WORKING CONDITIONS:

All materials and work space should be mainained at 70°F-80°F. Epoxy is a temperature sensitive material. When cool, it's thicker and sets slower. When warm, it's thinner and sets faster. When the material or working conditions are below 70°F, epoxy resin may become too viscous to properly release air and self level. Working in conditions or with material above 80°F, epoxy resin may set too quickly and become too hot and exotherm, which could cause it to yellow, distort or crack.

  • CAUTION EXOTHERMIC REACTIO:
  • Mixed epoxy generates heat. The more you mix, the hotter it will be. You must use after mixing. Only mix what you are ready to pour.
  • NEVER leave mixed epoxy in your mixing bucket unattended.
  • The longer the mixed epoxy sits in your bucket, the quicker it will begin to generate excess heat, set up, and may begin to smoke and then cure quickly inside the bucket.
1

Remind kindness of resin epoxy：

1. Mix ratio: Double check the proper 1:1 by volume mix ratio was used

2. Resin and hardener: Make sure you used resin and hardener and not all resin or all hardener

3. Fully mixed: Upon mixing, be sure to scrape sides and bottom of mixing container to ensure all resin and hardener are fully blended. Failing to do so can result in soft spots in coating

4. Pouring: NEVER scrape or brush the sides or bottom of the container you just mixed. There will always be an unmixed portion which can be dislodged and will leave a wet or sticky spot on your coating

5. Temperature: If the temp falls below 60°F while epoxy resin is initially setting up, it may stall out the chemical reaction needed to harden the epoxy. Increasing shop temp to 80°F+ for poxy before do a test 24 hours may help to restart the chemical reaction and harden roject. The following the epoxy coating.

6. This epoxy resin is not for tumblers craft.