







Application
The applicable medium of this product is diesel oil and kerosene. It is mainly used for refueling mining machinery, engineering machinery, construction sites, fishing boats, cruise ships, small refueling points, and other equipment, as well as refueling and transmission of automobile self-provided power supply.
Specification
Model: ACTP60
Process: Painting
Color: Yellow, Silver, Black
Material: Cast Iron, Aluminum Alloy, Copper
Plug Standard: US Standard
Motor: AC 110V 60Hz
Flow Rate: 20-60L/5.28-15.85gal/min
Power: 550Watts Self Priming
Max. Speed: 3300rpm
Suction Height: 5m/16ft
Max Lift: 15m/49ft
Inlet and Outlet Size: 2.5cm/1in
Power Cord Length: 1.88m/6.16ft
Maximum Working Pressure: 3Bar
Accuracy of Flowmeter: ± 1%
Single Counting Range: 0 ~ 9999L/0 ~ 2641.46Gal (4-digit Liter, Maximum 9999L/2641.46Gal, Last 1-digit Liter with Scale)
Assembly Required: Yes
Gross Weight: 9.65kg/ 21.27 lbs
Net Weight: 9kg/ 19.84 lbs
Product Size: 30*20*20cm/ 11.8*7.9*7.9 in
Package Size: 30*25*23cm/ 11.81*9.84*9.06in
Package Included
1 * Electric Oil Pump Transfer Fuel Diesel
1 * English Manual
1 * Filter
2 * Connectors
Notes
3. Our oil pump will be tested with diesel oil before leaving the factory, so some of the diesel remains in the machine, please use it after cleaning.
4. It is not allowed to transport gasoline, ethanol, non-ethanol, and second-cycle fuel.
5. Please make sure the power supply and oil pump voltage match before use.
6. The oil inlet pipe and joints must not leak to ensure the suction range.
7. Remember to install a strainer in the oil inlet pipe to avoid damage to the pump core due to hard debris being sucked into the pump cavity. The vane should always clear the surface dirt of the screen, otherwise, the screen will be blocked and the flow will be reduced and the pump will be damaged.
8. The oil pump can work continuously, but idling without oil should not exceed 5 minutes, so as not to damage the pump core, oil seal, and vane by friction and heat.
9. In order to ensure the service life of the oil pump, it is recommended to stop the pump after 20 minutes of continuous work for a short break.
10. Products with electrical plugs are designed for use in the US. Please check compatibility before purchasing.
11. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.



