Saltwater heals badge
(1) Vinyl  Decal

Made with high quality vinyl rated to withstand 5 -7 years of indoor/ outdoor use. 

Sizes: 
4" to 10"

The background will be whatever you install it on.
Sizes may vary slightly depending on design proportions. 

Sticks to any Smooth Clean surface. 
We have many other colors available, just let us know which color you wanted and we'll start an auction for you in that color. Installation instructions included with your order. We have other sizes and gaming decals available in our other listings. 









ABOUT THIS PRODUCT
This is a Transfer cut decal. It is made with three parts. A paper backing - which holds the actual vinyl decal. The decal - the item you purchased and what is to be applied to your clean smooth surface. The Transfer tape - this is tape that is applied to the top of the decal and what is used to transfer the decal in one piece to your smooth clean surface. This will either be a clear or a masking (semiopaque) tape.

Application Instructions

What You'll Need:

  • Your transfer-cut decal

  • Clean, lint-free cloth

  • Rubbing alcohol or mild soap and water

  • Squeegee, credit card, or similar flat tool

  • Masking tape (optional for alignment)

  • Spray bottle with water + a drop of dish soap (for wet method)

 Step-by-Step: Dry Application (Best for Small to Medium Decals)

  1. Clean the Surface Wipe the area with rubbing alcohol or soap and water. Let it dry completely. Avoid glass cleaners, they can leave residue.

  2. Position the Decal Without removing the backing, place the decal where you want it. Use masking tape to hold it in place or create a hinge at the top.

  3. Peel the Backing Slowly peel the white/back layer away, leaving the decal stuck to the clear transfer tape.

  4. Apply the Decal Starting from the top or one side, press the decal onto the surface using a squeegee or credit card. Work slowly to avoid bubbles.

  5. Burnish It Firmly rub over the entire decal with your tool to ensure good adhesion.

  6. Remove the Transfer Tape Peel the clear tape back slowly at a sharp angle. If any part lifts, press it back down and rub again.

Wet Application Technique (Recommended for Large Decals)

This method allows repositioning and reduces bubbles, ideal for vehicle graphics, wall art, or large window decals.

  1. Mix Your Solution Fill a spray bottle with water and add 1-2 drops of dish soap. Shake gently.

  2. Clean the Surface Thoroughly Remove all dirt, oils, and residues. Dry completely.

  3. Spray the Surface Lightly Mist the area with your soap solution. Don' t soak, just a light, even coat.

  4. Peel and Position the Decal Remove the backing and place the decal (still on transfer tape) onto the wet surface. You can slide it into position.

  5. Squeegee Out the Water Starting from the center, use firm strokes to push water and air bubbles outward. Wipe excess moisture with a cloth.

  6. Let It Set Allow the decal to dry and bond for 30/60 minutes before removing the transfer tape. In humid conditions, wait longer.

  7. Remove Transfer Tape Peel slowly at a sharp angle. If edges lift, press them down and wait a bit longer before retrying.

Pro Tips:

  • For textured surfaces (like walls), use extra pressure and heat (hair dryer) to help adhesion.

  • Avoid applying in extreme cold or direct sunlight.

  • If bubbles persist, use a pin to pop them and smooth out gently.





The Salt Life  Vinyl Decal Sticker is a personalized die-cut sticker featuring a watersports, boating, and surfing theme. Made of vinyl with a 6-inch length, this decal can be customized with a desired color from the image provided. Manufactured in the United States by Oracal, this sticker is perfect for adding a touch of beach life to any home or vehicle.