1 Mod 6mm Bore 15 Teeth Left Hand & 10mm Bore 30 Teeth Right Hand Bevel Gears
Description:
Material: These bevel gears are made of 45# steel with a black oxide surface treatment. Compared to ordinary steel, they have higher hardness, strength, stability, durability, wear resistance, and greater resistance to deformation.
1:2 Speed Ratio: Include bevel gears have a speed ratio of 1:2 and are all 1 module. Under the same module, the small gear and the large gear are installed and used in a 90-degree combination.
Installation: The ground spiral bevel gears is equipped with screws, which is simple and convenient to use. When assembling the bevel gear, the center lines of the two shafts need to be adjusted to the same plane. After assembly, debugging is carried out to ensure the normal operation of the equipment.
Wide Application: Ground spiral bevel gears play an important role in transmitting power and changing the direction of transmission. They are widely used in various mechanical transmission occasions, such as conveying equipment, agricultural equipment, food industry, textile machinery, automobile differentials, printing machinery, etc.
Specification:
Material: These bevel gears are made of 45# steel with a black oxide surface treatment. Compared to ordinary steel, they have higher hardness, strength, stability, durability, wear resistance, and greater resistance to deformation.
1:2 Speed Ratio: Include bevel gears have a speed ratio of 1:2 and are all 1 module. Under the same module, the small gear and the large gear are installed and used in a 90-degree combination.
Installation: The ground spiral bevel gears is equipped with screws, which is simple and convenient to use. When assembling the bevel gear, the center lines of the two shafts need to be adjusted to the same plane. After assembly, debugging is carried out to ensure the normal operation of the equipment.
Wide Application: Ground spiral bevel gears play an important role in transmitting power and changing the direction of transmission. They are widely used in various mechanical transmission occasions, such as conveying equipment, agricultural equipment, food industry, textile machinery, automobile differentials, printing machinery, etc.
Specification:
- Model: Mod 1
- Teeth: 15T; 30T
- Bore: 6mm / 0.24inch; 10mm / 0.39inch
- Teeth Length: 5.5mm / 0.22inch
- Outer Diameter (Teeth Part): 16.95mm / 0.67inch; 30.49mm / 1.2inch
- Step Diameter: 13mm / 0.51inch; 20mm / 0.79inch
- Step Height: 9.5mm / 0.37inch; 9mm / 0.35inch
- Total Height: 15.52mm / 0.61inch; 15.29mm / 0.6inch
- Package Content: 2 Pcs x Bevel Gears
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
1 Mod 6mm Bore 15 Teeth Left Hand & 10mm Bore 30 Teeth Right Hand Bevel Gears
Description:
Material: These bevel gears are made of 45# steel with a black oxide surface treatment. Compared to ordinary steel, they have higher hardness, strength, stability, durability, wear resistance, and greater resistance to deformation.
1:2 Speed Ratio: Include bevel gears have a speed ratio of 1:2 and are all 1 module. Under the same module, the small gear and the large gear are installed and used in a 90-degree combination.
Installation: The ground spiral bevel gears is equipped with screws, which is simple and convenient to use. When assembling the bevel gear, the center lines of the two shafts need to be adjusted to the same plane. After assembly, debugging is carried out to ensure the normal operation of the equipment.
Wide Application: Ground spiral bevel gears play an important role in transmitting power and changing the direction of transmission. They are widely used in various mechanical transmission occasions, such as conveying equipment, agricultural equipment, food industry, textile machinery, automobile differentials, printing machinery, etc.
Specification:
Material: These bevel gears are made of 45# steel with a black oxide surface treatment. Compared to ordinary steel, they have higher hardness, strength, stability, durability, wear resistance, and greater resistance to deformation.
1:2 Speed Ratio: Include bevel gears have a speed ratio of 1:2 and are all 1 module. Under the same module, the small gear and the large gear are installed and used in a 90-degree combination.
Installation: The ground spiral bevel gears is equipped with screws, which is simple and convenient to use. When assembling the bevel gear, the center lines of the two shafts need to be adjusted to the same plane. After assembly, debugging is carried out to ensure the normal operation of the equipment.
Wide Application: Ground spiral bevel gears play an important role in transmitting power and changing the direction of transmission. They are widely used in various mechanical transmission occasions, such as conveying equipment, agricultural equipment, food industry, textile machinery, automobile differentials, printing machinery, etc.
Specification:
- Model: Mod 1
- Teeth: 15T; 30T
- Bore: 6mm / 0.24inch; 10mm / 0.39inch
- Teeth Length: 5.5mm / 0.22inch
- Outer Diameter (Teeth Part): 16.95mm / 0.67inch; 30.49mm / 1.2inch
- Step Diameter: 13mm / 0.51inch; 20mm / 0.79inch
- Step Height: 9.5mm / 0.37inch; 9mm / 0.35inch
- Total Height: 15.52mm / 0.61inch; 15.29mm / 0.6inch
- Package Content: 2 Pcs x Bevel Gears
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.