The manual button has the task of triggering the "fire protection circuit breaker", which disconnects the building's power supply from the power source during a fire during a rescue operation.
The PWP1 manual push button can be used as a "fire protection circuit breaker" if a sign is attached above it: "fire protection circuit breaker".
Complete is an adhesive sign: "Fire protection circuit breaker".
The PWP1 manual start button with double LED display gives you the ability to view information about: 1.
The red LED should light up when the switch is on, in case of impact, the fast red LED should go off, and the green LED should light up informing when the switch is started.
The green LED should preferably be powered from a separate power source in front of the switch.
Minimum number of cables needed to connect the switch: 2 LED switch design: 1.
When selecting the busbars, consider the selected type (A or B) TYPE A tracks NO (10,20,30): after striking, quickly or disassembling the cover, the tracks open. NC turnstings (01,02,03): the tracks close quickly after hitting or disassembling the lid. Mixing tracks NC/NO (11,12,21): After beating, the quick tracks open and the turn tracks close. TYPE B tracks NO (10,20,30): After hitting, quickly or disassembling the lid, press the button manually - the tracks close. NC turntings (01,02,03): quickly press the button after hitting or disassembling the lid - the tracks open. NC/NO mixing tracks (11,12,21): At the touch of a button, the drill tracks close and the turntings open.
2LED7: C230VAC+Z230VAC
2LED8: C230VAC+Z24VDC
2LED10: C24VDC+Z230VAC
2LED11: C24VDC+Z24VDC
Quantity
Not all available quantities are visible due to eBay limitations. Need more? Contact us for a custom offer.
Invoice
For EU businesses we issue intra-community invoices when the applicable requirements are met.
Shipping
Ships from Poland. Delivery time and cost are shown in the eBay listing.
Returns and purchase
The eBay terms for payment, returns and buyer protection apply as shown in the listing.