2Pcs Straight Single Linear Slide Potentiometer B10K 100mm 8x8mm Metal Handle
What is this?
Sliding potentiometers are mainly used to adjust the current or voltage in circuits. By moving the sliding rod, the resistance value inside the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. This type of potentiometer usually has linear characteristics, that is, there is a linear relationship between the position of the sliding rod and the resistance value, which is convenient for precise control.
What will I get?
The Fader Variable Resistors Mixer is in size:
Nominal Resistance: B10K
Total length of potentiometer: 128mm / 5.04 Inch
Material: Metal
Model: Single Linear
Pin Number: 3
Shaft: 8x8mm
Travel Value: 100mm / 3.94 Inch
In the Package of: 2 x Electronic Potentiometer
Are there any advantages of the product?
This sliding potentiometer has linear characteristics, providing smooth and precise control throughout its entire travel range. By moving the slider in one direction, the internal resistance value of the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. It is highly accurate, provides a stable resistance value and reliable adjustment performance, and is durable, able to withstand certain mechanical stress and environmental changes.
How to use it?
1. Connect the pin of the potentiometer to the corresponding circuit as required (pay attention to distinguish the input end, output end, and regulation end).
2. As needed, gently rotate or slide the slider on the potentiometer until the desired resistance value is reached.
What should I notice?
Since the product is measured by hand, please allow a 1-2mm error. Tips: Avoid high-temperature burns when casting.
Sliding potentiometers are mainly used to adjust the current or voltage in circuits. By moving the sliding rod, the resistance value inside the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. This type of potentiometer usually has linear characteristics, that is, there is a linear relationship between the position of the sliding rod and the resistance value, which is convenient for precise control.
What will I get?
The Fader Variable Resistors Mixer is in size:
Nominal Resistance: B10K
Total length of potentiometer: 128mm / 5.04 Inch
Material: Metal
Model: Single Linear
Pin Number: 3
Shaft: 8x8mm
Travel Value: 100mm / 3.94 Inch
In the Package of: 2 x Electronic Potentiometer
Are there any advantages of the product?
This sliding potentiometer has linear characteristics, providing smooth and precise control throughout its entire travel range. By moving the slider in one direction, the internal resistance value of the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. It is highly accurate, provides a stable resistance value and reliable adjustment performance, and is durable, able to withstand certain mechanical stress and environmental changes.
How to use it?
1. Connect the pin of the potentiometer to the corresponding circuit as required (pay attention to distinguish the input end, output end, and regulation end).
2. As needed, gently rotate or slide the slider on the potentiometer until the desired resistance value is reached.
What should I notice?
Since the product is measured by hand, please allow a 1-2mm error. Tips: Avoid high-temperature burns when casting.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.
2Pcs Straight Single Linear Slide Potentiometer B10K 100mm 8x8mm Metal Handle
What is this?
Sliding potentiometers are mainly used to adjust the current or voltage in circuits. By moving the sliding rod, the resistance value inside the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. This type of potentiometer usually has linear characteristics, that is, there is a linear relationship between the position of the sliding rod and the resistance value, which is convenient for precise control.
What will I get?
The Fader Variable Resistors Mixer is in size:
Nominal Resistance: B10K
Total length of potentiometer: 128mm / 5.04 Inch
Material: Metal
Model: Single Linear
Pin Number: 3
Shaft: 8x8mm
Travel Value: 100mm / 3.94 Inch
In the Package of: 2 x Electronic Potentiometer
Are there any advantages of the product?
This sliding potentiometer has linear characteristics, providing smooth and precise control throughout its entire travel range. By moving the slider in one direction, the internal resistance value of the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. It is highly accurate, provides a stable resistance value and reliable adjustment performance, and is durable, able to withstand certain mechanical stress and environmental changes.
How to use it?
1. Connect the pin of the potentiometer to the corresponding circuit as required (pay attention to distinguish the input end, output end, and regulation end).
2. As needed, gently rotate or slide the slider on the potentiometer until the desired resistance value is reached.
What should I notice?
Since the product is measured by hand, please allow a 1-2mm error. Tips: Avoid high-temperature burns when casting.
Sliding potentiometers are mainly used to adjust the current or voltage in circuits. By moving the sliding rod, the resistance value inside the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. This type of potentiometer usually has linear characteristics, that is, there is a linear relationship between the position of the sliding rod and the resistance value, which is convenient for precise control.
What will I get?
The Fader Variable Resistors Mixer is in size:
Nominal Resistance: B10K
Total length of potentiometer: 128mm / 5.04 Inch
Material: Metal
Model: Single Linear
Pin Number: 3
Shaft: 8x8mm
Travel Value: 100mm / 3.94 Inch
In the Package of: 2 x Electronic Potentiometer
Are there any advantages of the product?
This sliding potentiometer has linear characteristics, providing smooth and precise control throughout its entire travel range. By moving the slider in one direction, the internal resistance value of the potentiometer can be changed, thereby adjusting the electrical signal in the circuit. It is highly accurate, provides a stable resistance value and reliable adjustment performance, and is durable, able to withstand certain mechanical stress and environmental changes.
How to use it?
1. Connect the pin of the potentiometer to the corresponding circuit as required (pay attention to distinguish the input end, output end, and regulation end).
2. As needed, gently rotate or slide the slider on the potentiometer until the desired resistance value is reached.
What should I notice?
Since the product is measured by hand, please allow a 1-2mm error. Tips: Avoid high-temperature burns when casting.
Hot Item
- 1.We accept eBay payment .
- 2.Payment must be received within 7 business days of auction closing.
- 1.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
- 2.Items will be shipped within 1-3 business day when we received payment.
- 3.Delivery time depends on destination and other factors.