Please check the connectors prior to ordering!

There are different 6-pin plug connectors which cannot be determined from the visual pump shape pump. Please take 5 minutes to remove the 6 screws from the top of the pump to confirm pin type prior to ordering. 

This listing is for the older 6-pin usually black connector variants. Additional pictures in the listing - please check!

Information:

• The PCB comes soldered with the components ready for the Older 6-pin Connector version of the Lay-Z-Spa pumps.
• This has been built and pre-flashed with the version from VisualApproach. Please read the manual on his GitHub repository.
• This gives you local control via your home WiFi or can be connected to Home Assistant. This does not allow connection with the Lay-Z-Spa App.

Note:

• Pre-configuration of the device prior to connecting to the pump is recommended by powering the device via USB. What to change and how is included within the instructions on the VisualApproach GitHub repository.

Disclaimer:

• This is a modification; if anything breaks or invalidates your warranty, I cannot accept liability as the seller.

WARNING - Electric shock can kill

• Touching live electrical parts can cause fatal shocks or severe burns.
• Pull out the mains plug from the outlet before modifying any hardware.
• You undertake this at your own risk.

Credit:

• I take no credit for the PCB design or contents; credits to the "Visualapproach".