Specifications: 10 * 10mm, 8 * 8mm, 6 * 6mm, 5 * 5mm, 4 * 4mm
The iron plated universal joint can bend at any angle (rotation angle 45 degrees), and the universal joint can change the transmission direction at any angle. Originally, a motor shaft is oriented to the south. Through universal joint connection, the direction of the rotating shaft can be changed to face the ground. It can isolate or absorb axial vibration and impact. It has the advantages of large torque, small transmission inertia, large adjustment angle, convenient installation, wide application range, long service life, etc., and is suitable for various general machinery occasions.
Material: iron exquisite electroplating
*** The following three dimensions: outer diameter: 12mm length: 52mm ***
6-6 refers to the hole diameter at one end of 6mm, and the hole diameter at the other end of 6mm; (M3 machine screw is used for side hole)
5-5 indicates the aperture of one end is 5mm, and the aperture of the other end is 5mm; (M3 machine screw is used for side hole)
4-4 indicates that the aperture of one end is 4mm, and the aperture of the other end is 4mm; (M3 machine screw is used for side hole)
*** The following two dimensions: length: 58mm, outer diameter of 8 * 8 is 14mm, outer diameter of 10 * 10 is 16mm ***
8-8 indicates the aperture of one end is 8mm, and the aperture of the other end is 8mm; (M4 set screw is used for side hole)
10-10 indicates the aperture of one end is 10mm, and the aperture of the other end is 10mm; (M4 set screw is used for side hole)
Please allow minor error due to manual measurement. Thank you!
Due to the difference between different monitors, the picture may not reflect the actual color of the item.