FOR SALE

ORIGINAL PS4 DUALSHOCK 4 V2 CONTROLLER MOTHERBOARD  

JDM-040 MOTHERBOARD UPGRADED WITH BRAND NEW TMR JOYSTICKS  

THIS MOTHERBOARD IS COMPATIBLE ONLY WITH DUALSHOCK 4 V2 MODEL JDM-040 - PLEASE CHECK PHOTOS AND READ INFORMATION IN RED BELOW.

K-SILVER JS13 PRO+

TMR - TUNNEL MAGNETORESISTANCE - IS THE NEWEST TECHNOLOGY AND SIMILAR TO HALL EFFECT.

TMR IS GENERALLY SUPERIOR TO HALL EFFECT IN MAGNETIC SENSORS, OFFERING HIGHER SENSITIVITY, BETTER SIGNAL-TO-NOISE RATIO, LOWER POWER CONSUMPTION, AND IMPROVED TEMPERATURE STABILITY, MAKING IT IDEAL FOR PRECISE APPLICATIONS LIKE GAMING CONTROLLERS.

YOU WILL RECEIVE FULLY TESTED AND 100% WORKING MOTHERBOARD WITH PROFESSIONALLY INSTALLED PAIR OF TMR JOYSTICKS.

AFTER INSTALATION JOYSTICS ARE CALIBRATED BY ME USING DualShock Calibration GUI TO ENSURE PERFECT STICK CENTRE AND STICK RANGE (CIRCULARITY) IN RANGE OF 4-6%

CALIBRATION THEN IS SAVED BUT CAN BE EDITED AND RECALIBRATED TO SUITS YOUR NEEDS.

!!!IMPORTANT INFO ABOUT CALIBRATION!!!

IN ORDER TO PROPERLY CALIBRATE JOYSTICK RANGE (CIRCULARITY) YOU HAVE TO FULLY ASSEMBLE YOUR CONTROLLER. YOU BASICALLY HAVE TO PUT EVERYTHING TOGETHER - INSTALL MOTHERBOARD WITH THUMBSTICKS INTO THE HOUSING SHELL, CLOSE UP THE HOUSING, TIGHTEN THE SCREWS AND THEN WHEN IT’S READY TO GO YOU CAN PROPERLY CALIBRATE IT.

THE ONLY REASON FOR THIS IS DUE TO DIFFERNCE IN TILT OF THE JOYSTICS – HOW FAR THEY CAN GO IN EACH DIRECTION. HOUSING SHELL OF THE DUALSHOCK CONTROLLER AND THUMBSTICKS LIMITS THE TILT SO THE STICKS DONT GO TO THE EDGE.

 

MOTHERBOARD MODEL NR – JDM-040
TMR JOYSTICKS MODEL – K-SILVER JS13 PRO+

EACH BOARD HAS BEEN TESTED AND ALL FUNCTIONS ARE 100% WORKING INCLUDING:

• -      POWER – MICRO-USB PORT, BATTERY CHARGING ETC.
• -      AUDIO – HEADPHONE JACK, MICROPHONE ETC.
• -      CONNECTIVITY – WIRED USB TO PC/PS4 OR BLUETOOTH
• -      BUTTON OUTPUT FULLY TESTED – 100% WORKING
• -    100% WORKING

-      PLEASE NOTE THAT THIS IS MOTHERBOARD ONLY – NO OTHER PARTS INCLUDED. TESTS WERE DONE ON EXTERNAL PARTS THAT ARE NOT INCLUDED. 

THERE ARE FIVE MODELS (REVISIONS) OF PS4 DUALSHOCK CONTROLLERS RELEASED OVER THE LAST FEW YEARS: 

DUALSHOCK 4 V1 

• JDM-001
• JDM-011/020 
• JDM-030

 DUALSHOCK 4 V2 

• JDM-040
• JDM-050/055

THE BEST WAY TO DETERMINE WHICH MODEL YOU HAVE IS TO OPEN IT UP AND YOU WILL FIND IT PRINTED ON MOTHERBOARD. IF YOU WANT TO CHECK IT WITHOUT OPENNING IT UP PLEASE CONNECT YOUR CONTROLLER VIA USB-C CABLE TO YOUR PC/LAPTOP AND USE WEBSITE DualShock Calibration GUI

 

IF YOU NEED HELP TO IDENTIFY YOUR MODEL AND TO BE SURE THAT THIS IS CORRECT PART PLEASE CONTACT ME.

Short guide for identifying Dualshock 4 controller model (version, revision) for PlayStation 4 consoles

Original DualShock 4 controllers for PlayStation 4 can be divided into two generations:

First generation DualShock 4 (without additional lightbar on touchpad, black buttons and analog sticks) can have one of below versions:

JDM-001 - mostly blue boards, 14 PIN USB socket ribbon.

JDM-011 - green boards, 12 PIN USB socket ribbon

JDM-020 - Twin Model of 011

JDM-030 - green boards, split conductive tape

Second generation DualShock 4 (DualShock 4 V2 with additional lightbar and grey buttons and analog sticks):

JDM-040 - first revision of 2nd gen controllers

JDM-050 / 055 - two twin models

IF YOU ARE LOOKING FOR OTHER PARTS FOR DUALSHOCK CONTROLLERS PLEASE CHECK MY OTHER ITEMS OR MESSAGE ME. I HAVE MOST OF THE PARTS BUT NOT ALWAYS LISTED. 

This Item will be posted within max 48H (usually the same day if purchased before 1pm)

Please note:

We assume that you are having this item professionally installed or that you have done this before so no tools are included. We do not supply instructions with this item. All repairs are taken at the owners risk. We hold no responsibility for any damage caused to either your phone or to this item by incorrect fitting. If in doubt please take this part to a professional for fitting. Each item is checked and security marked before shipping

 

Please ask if you have any questions.