Specification

Color: Black, Clear

Material: PU, Iron Plate, Copper, Aluminum, Magnets

Model: KD-100

Phase: 1

Mounting Type: Freestanding

Power Source: Corded Electric

Plug Standard: US Standard

Timing: 10-60min

Speed: 4 Gears (2000rpm, 2500rpm, 3000rpm, 3500rpm)

Capacity: 800g/1.76lbs

Voltage: 110V

Power: 0.2KW

Polishing Bucket Diameter: 12.7cm/5in

Product Size(L*H): 17.78*27.94cm/7*11in

Package Included           

1* Magnetic Polishing Machine

2* Fuses

1 Bag* Burnishing Pins

1* Polishing Bucket

Application

It is suitable for cubic zirconia (CZ), ruby, sapphire, diamond, gold, silver, copper, aluminum, zinc, magnesium, iron, stainless steel, hard plastic, non-metallic materials, etc. It can be used for polishing, rust removal, removing black spots, fine grinding, rough machining, chamfering, edge trimming, etc.

How to Use

1. Pour 1/4 of the water into a bucket and mix 0.22 lbs of burnishing pins with 0.22-0.44 lbs of jewelry(not included). Then add about 0.02 lbs of polishing solution(not included).

2. Press the lower green button to the “o” position for bi-directional rotation and to the “I” position for uni-directional rotation. It rotates in one direction for about 3 minutes, then automatically rotates in the opposite direction for 3 minutes. (It is recommended to rotate in both directions.) You can choose a specific time by turning the time control button.

Notes

• After polishing, there will inevitably be some polishing marks left, which need to be manually polished again to remove the marks and achieve a mirror effect!
• It has self-protection function. When it works for a long time, it will stop to rest. After the motor cools down, it will continue to work.
• Please note that it cannot polish flat surfaces.
• Please do not fill the polishing bucket with any corrosive liquid.
• Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.