Airosol Grey Plastic Primer Aerosol Spray — Pack of 6 — 500ml

Adhesion-promoting grey primer specially formulated to bond to plastic and rubber surfaces without sanding. Ideal for bumpers, trim and spoilers.

Pack: 6 cans Brand: Airosol Volume: 3000ml (6 x 500ml cans) Colour: Grey Finish: Matt Type: Plastic Primer / Adhesion Promoter Made in: UK

⚠ Flammable Aerosol · UN1950 🚚 Road Courier Only ✓ VOC Compliant

Key Features

✓ PP plastic front and rear bumpers	✓ ABS plastic trim, spoilers and side skirts
✓ Rubber door seals and mouldings	✓ Any unpainted plastic automotive component

How to Use

1 Ensure the surface is clean, dry, and dust-free. Apply etch primer to bare metal first where required.

2 Shake the can for at least 2 minutes after the agitator ball falls freely.

3 Apply in cross coats from approximately 20cm from the surface.

4 Allow 12–45 minutes between coats. Sand lightly between coats for best results.

5 After use, invert the can and spray briefly to clear the valve.

Safety Information

⚠ Hazard Information — Read Before Use

▸ Extremely flammable aerosol. Contains flammable gas under pressure.

▸ Harmful vapours — irritates eyes, skin, and respiratory tract.

▸ Use in a well-ventilated area. Keep away from heat, sparks, and open flames.

▸ Do not pierce or burn, even after use. Do not expose to temperatures above 50°C.

▸ Keep out of reach of children.

▸ Read all cautions on the product label before use.

UN1950 — Aerosols, Flammable.

Dispatch & Delivery

🚚 Road Courier Delivery Only
This product is a flammable aerosol (UN1950) and is classified as Dangerous Goods. Delivery is by road-based courier to mainland UK addresses only. Please ensure you are available to receive the parcel, as a signature may be required.