• Features:
  • 3 Jaw Self Centering Lathe Chuck, Sttructure of solid jaws
  • New and High Quality.
  • The 3-Jaw Self-Centering Chuck Features Short Cylindrical Center Mounting.
  • Semi-Steel Chuck Body is Made From High Quality Cast Iron, Durable In Use.
  •  
  • Specifications:
  • Diameter: 3"/80mm
  • Max. Imput Torque: 40Nm
  • Max. Speed: 4000r/min
  • New and High Quality.
  • Model: K11 80
  • Chuck Type: Three Jaw Chuck
  • Power Type: Manual
  • Chuck Diameter: 80mm / 3.15in
  •  

    • 3 Jaw Lathe Chuck Manual Chuck 3" Self-centering Lathe Drilling Part K11-80 80mm

    Features:

    3 Jaw Self Centering Lathe Chuck, Sttructure of solid jaws

    New and High Quality.

    The 3-Jaw Self-Centering Chuck Features Short Cylindrical Center Mounting.

    Semi-Steel Chuck Body is Made From High Quality Cast Iron, Durable In Use.

     

    Specifications:

    Diameter: 3"/80mm

    Max. Imput Torque: 40Nm

    Max. Speed: 4000r/min

    New and High Quality.

    Model: K11 80

    Chuck Type: Three Jaw Chuck

    Power Type: Manual

    Chuck Diameter: 80mm / 3.15in

     

    Diameter of the chuck: φ80 mm
    Center through hole: φ16 mm
    Clamping range of the outer jaws: 22–63 mm
    Clamping range of the inner jaws: 2–22 mm
    Clamping range of the reverse jaws: 25–70 mm
    Distribution of installation holes: φ66 mm (3×M6)
    Maximum rotational speed: 4000 r/min 

     

    1. Clean the end face of the spindle and the installation surface of the chuck, remove iron filings, oil stains and burrs.
    2. Align the stop of the spindle, place it steadily and ensure concentricity.
    3. Tighten the bolts diagonally and alternately in several stages evenly, and prohibit unilateral tightening.
    4. Rotate at low speed for 1-2 minutes to check for runout, abnormal noise and looseness.
    5. Regularly lubricate the gear disk and clean the claw grooves to avoid overloading clamping.

     

    Package Included:

    1 x Lathe Chuck

    3 x Jaws

    1 x Wrench

    3 x Screw

    3 x Nut



    Payment

    Shipment

    Usually we arrange shipping in 3 business day after payment confirmed.
    Orders will be shipped out via Carrier USPS or FedEx .

    Delivery time :

    When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.

    Warrenty & RMA

    Warranty for defective items (excluding items damaged and/or misused after receipt).
    In order to return an item you must contact us to request a RMA No.
    Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.

    Service & Contact

    We hope you have a pleasant shopping experience with us and satisfy 100%.
    If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
    Usually, we response your email in 1 business day.

    [ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    content_src_url

    Shop Category
     Store Home
     Suspension & Steering
     Lighting & Lamps
     Carburetor
     Radiators
     Fans & Kits
     Auto Valve
     Motorcycle Valve
     Fuel Injector
     Boat Parts
     Brakes & Brake Parts
     Golf Cart Parts
     Car Repair Kit
     Go Kart Parts
     Auto Engine System
     Auto Ignition System
     Auto Hub
     Motorcycle Ignition System
     Motorcycle engine system
     Auto Actuator
     Auto Motor
     Auto Inlet & Outlet System
     Auto Circuit Wiring Harness
     Transmission System
     Auto Switch
     Motorcycle Control System
     Auto Sensor
     Motorcycle Pump
     Auto Interior
     Exterior Trimming Parts
     Auto Bump
     Home & Garden
     Business & Industrial
     A/C Compressor & Clutch
     Snowmobile Parts
     Other
    Hot Item
    New List Item
    3 Jaw Lathe Chuck Manual Chuck 3" Self-centering Lathe Drilling Part K11-80 80mm


    Usually we arrange shipping in 3 business day after payment confirmed.
    Orders will be shipped out via Carrier USPS or FedEx .

    Delivery time :

    When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.

    Warranty for defective items (excluding items damaged and/or misused after receipt).
    In order to return an item you must contact us to request a RMA No.
    Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.

    We hope you have a pleasant shopping experience with us and satisfy 100%.
    If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
    Usually, we response your email in 1 business day.

    [ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]


    All rights reserved.

    On May 4, 2026 at 01:15:22 PDT, seller added the following information:

    Datacaciques