• Package Including:
    • 1 x Lathe Chuck
    • 3 x Jaws
    • 1 x Wrench
    • 3 x Screw
    • 3 x Nut
     
  • Specification：
    • Diameter of the chuck: φ130 mm  Center hole: φ32 mm  Installation screw holes: φ112 mm (3×M8)  Thickness of the chuck: 52 mm  Outer jaw clamping range: 40–110 mm  Inner jaw clamping range: 3–40 mm  Reverse jaw clamping range: 45–125 mm  Maximum rotational speed: 3000 r/min 
    •  

    • K11-130 5 Inch Lathe Chuck 3-Jaw Self-Centering Chuck 3-M8 Mounting Thread

    Package Including:

    • 1 x Lathe Chuck
    • 3 x Jaws
    • 1 x Wrench
    • 3 x Screw
    • 3 x Nut

     

    Specification：

    • Diameter of the chuck: φ130 mm
      Center hole: φ32 mm
      Installation screw holes: φ112 mm (3×M8)
      Thickness of the chuck: 52 mm
      Outer jaw clamping range: 40–110 mm
      Inner jaw clamping range: 3–40 mm
      Reverse jaw clamping range: 45–125 mm
      Maximum rotational speed: 3000 r/min 

       

    • 1. Clean the end face of the spindle and the installation surface of the chuck, remove iron filings, oil stains and burrs.
      2. Align the stop of the spindle, place it steadily and ensure concentricity.
      3. Tighten the bolts diagonally and alternately in several stages evenly, and prohibit unilateral tightening.
      4. Rotate at low speed for 1-2 minutes to check for runout, abnormal noise and looseness.
      5. Regularly lubricate the gear disk and clean the claw grooves to avoid overloading clamping.

     

    Features：

    • MAIN PARAMETER - 3 jaw self-centering design lathe chuck. Diameter: 130 mm (5.1")
    • QUALITY MATERIAL - Cast iron chuck body. All guideways and bearing surfaces are precisely machined
    • 2 SETS OF JAWS - Internal and external jaw sets included. 
    • Internal clamping range: 3-40 mm (0.12"-1.58"). 
    • Jamming range: 40-130 mm (1.58"-5.12"). 
    • External clamping range: 40-120 mm (1.58"-4.7")
    • DURABLE IN USE - Both side of jaw teeth and guides are ground and hardened to HRC 58-62


    Payment

    Shipment

    Usually we arrange shipping in 3 business day after payment confirmed.
    Orders will be shipped out via Carrier USPS or FedEx .

    Delivery time :

    When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.

    Warrenty & RMA

    Warranty for defective items (excluding items damaged and/or misused after receipt).
    In order to return an item you must contact us to request a RMA No.
    Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.

    Service & Contact

    We hope you have a pleasant shopping experience with us and satisfy 100%.
    If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
    Usually, we response your email in 1 business day.

    [ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]

    content_src_url

    Shop Category
     Store Home
     Suspension & Steering
     Lighting & Lamps
     Carburetor
     Radiators
     Fans & Kits
     Auto Valve
     Motorcycle Valve
     Fuel Injector
     Boat Parts
     Brakes & Brake Parts
     Golf Cart Parts
     Car Repair Kit
     Go Kart Parts
     Auto Engine System
     Auto Ignition System
     Auto Hub
     Motorcycle Ignition System
     Motorcycle engine system
     Auto Actuator
     Auto Motor
     Auto Inlet & Outlet System
     Auto Circuit Wiring Harness
     Transmission System
     Auto Switch
     Motorcycle Control System
     Auto Sensor
     Motorcycle Pump
     Auto Interior
     Exterior Trimming Parts
     Auto Bump
     Home & Garden
     Business & Industrial
     A/C Compressor & Clutch
     Snowmobile Parts
     Other
    Hot Item
    New List Item
    K11-130 5 Inch Lathe Chuck 3-Jaw Self-Centering Chuck 3-M8 Mounting Thread


    Usually we arrange shipping in 3 business day after payment confirmed.
    Orders will be shipped out via Carrier USPS or FedEx .

    Delivery time :

    When you find track information is abnormal or not get goods , please feel free to email contact us first for troubleshooting, Don"t open dispute case immediately Please.

    Warranty for defective items (excluding items damaged and/or misused after receipt).
    In order to return an item you must contact us to request a RMA No.
    Please returned items in the original packaging, fill in RMA number on package, and PROVIDE us reason for the return, and your eBay ID.

    We hope you have a pleasant shopping experience with us and satisfy 100%.
    If there are any item or delivery problems, please email contact us first, BEFORE you leave neutral or negative feedback, or 1,2,3 ratings, so that we can address your concerns. Please give us the opportunity to resolve any problem.
    Usually, we response your email in 1 business day.

    [ Default Others: This is the contents of your Others. You can add a banner for this Others as header and add text descriptions here. The text descriptions can be different Font Size, Font Color, Style and even graphics and icons are also accepted. ]


    All rights reserved.

    On Apr 6, 2026 at 18:52:08 PDT, seller added the following information:

    Datacaciques