This lot is for one
Cirris 1100H+ Harness Tester 1500 VDC.
Two (2) HBDP-25 25 Pin D-Sub Male modules installed, simple red testing probe as shown, and angled system mount, and power supply.
The Signature 1100H+ cable and harness tester, with its large, easy-to-read display and user-friendly interface, carries on the tradition of Cirris’ Signature 1000H and 1000H+ as the most popular high-voltage benchtop wiring analyzer in the industry.
Low Voltage Test
2 Wire
- Voltage: 4 V max
- Current: 3 μA to 6 mA
- Resistance: 0.1 Ω to 100 kΩ ± 1% ± 0.1 Ω, 100 kΩ to 5 MΩ ± 10%
4 Wire
- Voltage: 4 V max
- Current: 1 mA to 1 A
- Resistance: 0.001 Ω to 10 Ω ± 2% ± 0.001 Ω
Component Tests
- Diodes: Silicon, LEDs, zeners with breakdown < 4 V
- Resistors: 0.1 Ω to 100 kΩ ± 1% ± 0.1 Ω, 100 kΩ to 5 MΩ ± 10%
- Capacitors: 5 nF to 100 μF ±10% ± 0.02 nF
- Twisted Pairs: Verify proper pairing in twisted pair cables
High Voltage Test
Insulation Resistance Test
- Voltage: 50 to 1500 VDC ± 5% ± 5 V (2000 VDC optional)
- Resistance: 5 MΩ to 1000 MΩ ± 10%
Dielectric Withstand Test
- Voltage: 50 to 1500 VDC ± 5% ± 5 V (2000 VDC optional, 50 to 1000 VAC optional)
- Current Limit: 0.1 mA to 1.5 mA
- Max Capacitance Per Net: 150 nF @ 300 VDC, 90 nF @ 500 VDC, 45 nF @ 1000 VDC, 30 nF @ 1500 VDC, 9.5 nF @ 1000 VAC
- HV Energy Limit: 35 mJ
- HV Charge Limit: 45 μC
Max Points Per Net
Digital Input/Output
- 4 Inputs / 6 Outputs, 24 V Open collector, +10 V and +5 V each current limited to 100 mA
Test Point Interface
This unit will arrive in the condition shown. It comes with a 14 Day Guarantee against being DOA from receipt.
You are bidding on only what is listed in the description and what is in the pictures, if it is not listed in the description and you don't see it in the pictures, then it is not included. Power cords and power adapters are never included unless specifically mentioned.