- This anti-sag gate kit is used for either correcting or preventing gate sag

- It features two corner braces that can be installed internally or externally on the gate frame

- The wire tension adjustment mechanism(turnbuckle) attaches to the braces with a 2.5m ethylene coated steel cable and effortlessly restores the alignment of your gate/fence/door

- This kit ensures a simple and secure installation process that is both easy to assemble and disassemble

INSTALLATION INSTRUCTIONS

- Attach the upper corner brace to the corner closest to the hinge of the frame

- Attach the lower corner brace to the corner diagonally from the top brace

- Unwind the two hooked-ends of the turnbuckle(but not all the way)

- Hook the turnbuckle to the upper corner brace

- Hook the steel cable to the turnbuckle via the pre-looped end of the cable

- Feed the other end of the cable through the hole in the lower brace, pull through and fix a cable clamp to join the two cables together

- Slowly tighten the turnbuckle to increase the tension in the cable, thus reducing the sag in the gate

PACKAGE CONTENTS

1x Turnbuckle

1x Steel Cable 2.35m

2x Cable Clamps

2x Corner Braces

8x Screws