F150 Ecoboost 3.5L 2.7L Billet Vent to Atmosphere VTA Mod Plug Raptor
( 2013-2021 F150 Ecoboost Trucks）
( 2013-2021 F150 Ecoboost Trucks）
This VTA mod allows you to vent the hot boost to the atmosphere
instead of recycling it and creating much hotter inlet temperatures.
This will lower inlet temperatures and improve overall performance
throughout the operating range.
instead of recycling it and creating much hotter inlet temperatures.
This will lower inlet temperatures and improve overall performance
throughout the operating range.
The best part is you can have clean blow off valve sound and
know you have the best performance without recycling HOT air
and introducing unwanted heat into the engine.
know you have the best performance without recycling HOT air
and introducing unwanted heat into the engine.
Our VTA MOD is a no tools required installation in 15 minutes.
Awesome sounding little upgrade.
Awesome sounding little upgrade.
F150 EcoBoost Billet VTA Mod Install Instructions
1. Locate the Blow Valve Tube Coupler
2. Rotate the Couplers to Remove Blow Off Tube
3. Now Disconnect the BOV Hose to the Intake Tube
4. Install the VTA MOD into the Tube before the Blow Off Valve
1. Locate the Blow Valve Tube Coupler
2. Rotate the Couplers to Remove Blow Off Tube
3. Now Disconnect the BOV Hose to the Intake Tube
4. Install the VTA MOD into the Tube before the Blow Off Valve
The packaging contains：
1pcs blow off valve mod plug
1pcs blow off valve mod plug
On Apr 7, 2026 at 20:41:19 PDT, seller added the following information: