- 1 Year Warranty
- Same Day Handling
- Free Returns
New Alternator Replacement For Isuzu Med. Duty NPR NQR Models Isuzu 4.8L 4HE 97116697, 97189650, LR180509, 2902768100, 8971166973, AHI0126, 40044062, 90251145
Specifications
| OE Manufacturer: | HITACHI |
| Product Type: | Alternator |
| Weight: | 18.5000 |
| Condition: | NEW |
| Unit Source: | |
| Design / Type: | |
| Design / Type: | |
| Design / Type: | PMA |
| Starter Series: | |
| Location - General: | |
| Location - Specific: | |
| Design Type: | |
| Voltage: | 12 |
| Amperage: | 80 |
| kW: | |
| Rotation: | CW |
| Regulator/Fan: | IR/EF |
| Tooth Count: | |
| Spline Count: | |
| Polarity: | |
| Shaft Type: | |
| Duty Cycle: | |
| Horsepower: | |
| RPM: | |
| V-Set: | |
| Circuit Type: | |
| Plug Code: | |
| Plug Orientation: | |
| Pulley Class: | S3 |
| Case OD (mm): | |
| Overall Length (mm): | |
| Gear OD (mm): | |
| Pulley Belt Width (mm): | |
| Pulley OD (mm): | 82 |
| Shaft Overall Length (mm): | |
| Shaft OD (mm): | |
| Clutch Type: | |
| Operating Mode: | |
| Pads Included: | |
| Connection Type: | |
| Piston Material: | |
| Number of Pistons: | |
| Piston Outside Diameter (in): | |
| Piston Outside Diameter (mm): | |
| Bleeder Port Measurement: | |
| Inlet Port Measurement: | |
| Ignition Type: | |
| Housing Material: | |
| Torque (ft. lbs): | |
| Pulley OD (in): | |
| Crankshaft OD (in): | |
| Terminal Type: | |
| Sensor Included: | |
| Idle ACM Included: | |
| Cage Wheel Included: | |
| Wiring Harness Included: | |
| Number of Pistons: | |
| Caliper Pistion OD (mm): | |
| Motor Overall Length (in): | |
| Motor OD (in): | |
| Wheel OD (in): | |
| Bearing Inside Diameter (mm): | |
| Bearing Outside Diameter (mm): | |
| Bearing Width (mm): | |
| Rotor Inside Diameter (mm): | |
| Rotor Outside Diameter (mm): | |
| Rotor Overall Length (mm): | |
| Rotor Shaft Outside Diameter (mm): | |
| Rotor Shaft Overall Length (mm): | |
| Mounting Hardware Included: | No |
| Installation Hardware Included: | |
| Mounting Type: | |
| Mounting Type: | |
| Mounting Type: | |
| Cap Design: | |
| Plunger Type: | |
| Includes: | |
| Includes: | |
| Number of Mounting Holes: | |
| Number of Terminals: | |
| Number of Wires: | |
| ETB Inside Diameter (in): | |
| Terminal Type: | |
| Hose Inside Diameter: | |
| Minimum Flow Rate: | |
| Minimum Pressure: | |
| Unit Finish: | Same as OE |
| Unit Color: | |
| Number of Pieces: | 1 |
| Country of Origin: | CN |
| Country of Use: | |
| Notes: | W/ VACUUM PUMP |
| Other Part #: | 12335,204-223,AHI0126,400-44062,90-25-1145 |
Customer Service Available 7 Days A Week
Chevrolet W3500 Tiltmaster 1998-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
Chevrolet W4500 Tiltmaster 1999-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
Chevrolet W4500 Tiltmaster 1998-2002 V8 5.7L 350cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
Chevrolet W5500 Tiltmaster 1998-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
GMC W3500 Forward 1999-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
GMC W4500 Forward 1999-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
GMC W4500 Forward 1998-2002 V8 5.7L 350cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
GMC W5500 Forward 1999-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
Isuzu NPR 1998-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
Isuzu NPR 1998-2003 V8 5.7L 350cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
Isuzu NPR-HD 2000-2003 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
Isuzu NQR 1998-2002 L4 4.8L 290cid w/o Hydro Brakes Hitachi, 80 Amp, 3-Groove Pulley, Long Shaft
*NOTE: "M.T" Indicates Manual Transmission / "A.T" Indicates Automatic Transmission*
Please Reach Out To Customer Service To Confirm Fitment, If Necessary.
GM: 97116697, 97189650
Isuzu: 2-90276-810-0, 8971166973, 8971896500
Hitachi: LR180-509, LR180-509C, LR180-509CN, LR180-509R
Lester: 12335
PIC: 204-223
Arrowhead: AHI0126
J & N Automotive: 400-44062, 90-25-1145
Delco Remanufactured: 10459447, 10459467
MPA: 612335
NAPA Pro Series: 12335
Wilson Heavy Duty: 90-25-1145
MPA HD: X612335
NAPA HD: 12335
Wilson New: 90-25-1145N
BBB HD: 12335
BBB New: N12335
Romaine Electric: 12335N, 12335R-OEM, 36-12335
Dixie Electric: A-80082
WE STRIVE TO PROVIDE A 5 STAR EXPERIENCE!
Our objective is 100% customer satisfaction. If we did not fulfill your expectations please contact us using eBay messager.
All of our products are covered by a one year warranty from the date of purchase.
We offer warranty for products that have a manufacturing defect due to materials or workmanship. The warranty does not cover failure due to abuse, misuse, improper installation or modifications. We are not liable for the cost of installation, removal or any other expenses beyond the original purchase price of the item.
It is the responsibility of the customer to verify the correct application information prior to purchasing any product from our eBay store. All purchases made in error may be returned within 30 days from the date of purchase and are subject to a 20% restocking fee. The product must be returned in its original condition including the packaging.
Free shipping on purchases shipped to all 50 states.
We offer international shipping through eBay global shipping program.
We process and ship orders within one business day of the order information being received. With the exemption of U. S. holidays.
Expedited orders including next day, second day and third day delivery methods are processed and shipped the same business day if checkout is completed by 5pm Eastern Time.
We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. OEG Parts is not responsible for carrier delays such as weather or natural disasters.
All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return
To receive an RMA Please contact OEG Parts Customer Service.
All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations.
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Often, Customers reach out to us to help confirm fitment of parts prior to purchase.
We always recommend cross referencing a part number to ensure fitment as well.
You may Contact Us by locating the "Contact Seller" Button within a listing.
After making a purchase, the phone number will be visible to you through eBay when you click on "Contact Seller".
You can also find our phone number by clicking on FAQs > Other
It is against eBay Policy to provide you our contact information any other way.
Copyright © 2023
OEG Parts. All Rights Reserved.
eBay Template Design by OCDesignsOnline
categories