Good quality:

1.The thickness of the copper foil on the PCB of the switch is 2 ounces, the general thickness is only 0.25 ounces, the copper foil is too thin, and the relay on the PCB version is easy to burn out, so our switch is more durable and better than the other brand switch.

2.This switch adopts valley switching mode to ensure that the spark of the relay will be minimized when starting, which can extend the service life of the switch.

3.Use high-quality materials: UL-certified US standard 3-pin AC power socket.  UL-certified US standard 14AWG power cord. And the switch's shell is made of PA-765 flame retardant material. Make you safer and more reliable at work.

 

How to use:

1.Connect the power of Automatic Vacuum Switch.

2.Insert the electrical tool to the socket labelled TOOL.

3.Insert the vacuum cleaner or work lamp to connect to the VAC socket.

4.The electrical appliance inserted in the VAC socket must be kept at the ON status.

5.When the electrical tool is switched on, the vacuum cleaner or electrical appliance connected to VAC will switch on immediately.

6.When the electrical appliance inserted in the TOOL socket is switched OFF, the electrical appliance connected to the VAC socket will continue to operate for 10 seconds and then stop.

 

Max. motor rating should not exceed 120V, 15A,60Hz, 1875W.

/ Electrical Specifications /
Outlet Required: Standard 120V, 15A, 60Hz Outlet
Power Rating: 120V, 15A, 60Hz

 

Package Included:

1x vacuum switch with 15'' power cord

1x Installation instructionket

 

Warning!

1.The total current of all electrical appliances used with this device must not exceed 15A when operating

2.The electrical cutting tool can only be used at the TOOL socket and cannot be used by inserting it in the VAC socket

Use high-quality materials: UL-certified US standard 3-pin AC power socket. UL-certified US standard 14AWG power cord. And the switch's shell is made of PA-765 flame retardant material. Make you safer and more reliable at work.
Automatic turn on the vacuum when you start your tool , and delays 10 seconds to turn off the vacuum to clean the pipe when you complete your work. Saving time and electricity, reducing airboin toxin and noise that may lead the health problem. This can protect your health.
Package Included: ●1x vacuum switch with 15'' power cord ●1x Installation instruction
Suitable for most medium duty workloads. Perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum.
The total current of all electrical appliances used with this device must not exceed 15A when operating, and the electrical cutting tool can only be used at the TOOL socket and cannot be used by inserting it in the VAC socket.