Description
T16-Texture 16-Button Game Keyboard Hitbox Haute42 Fighting Game Joystick Arcade Leverless Controller
Description:
- This is a leverless controller made of crystal switches, which is completely white and flawless, making it irresistible. The RGB lighting effect has better transparency, allowing you to immerse yourself in the game.
Characteristics:
- Dual core ARM Cortex-M0+ at 133MHz.
- Supported by dedicated QSPI bus, up to 16MB off chip flash memory.
- Fully connected AHB crossover switch.
- Integrated 264kB on-chip SRAM in six independent groups.
- 40nm process node manufacturing, low dynamic power consumption, and low leakage.
- 1ms delay, no frame leakage rate above 95%.
- Supports firmware updates.
Compatibility:
- B: Xinput mode (for Windows/Steam)
- A: SWITCH mode
- X: for PS3 / Dinput mode (for Raspberry Pi / Android)
- Y: for PS4 mode (Compatible with PS4 games on PS5 consoleï¼
- RT: KEYBOARD mode
Input Mode:
- To change the input mode, hold one of the buttons(as shown above) as the controller is plugged in.
- Tips: This product defaults to Xinput mode, input mode is saved across power cycles.
- If there are games that do not compatible the above input modes, you can enter the Web Configurator to modify them for normal use.
Web Configurator:
- This product contains a built-in web-based configuration application which can be started up by holding START when plugging your controller into a PC. Then access http://192.168.7.1 in a web browser to begin configuration.
TURBO:
- Hold TURBO, then press the button which you need to be set for turbo function, then this button will be continuous sending while you press it, to cancel this turbo key, just repeat the previous step.
- The turbo key that set will be cleared when power off.
- These keys can be set as a Turbo key: A / B / X / Y / LB / RB / LT / RT.
RGB LED Setting:
- BACK + START + X Next Animation
- BACK + START + A Previous Animation
- BACK + START + Y Brightness Up
- BACK + START + B Brightness Down
- BACK + START + RB LED Parameter Up
- BACK + START + RT LED Parameter Down
- BACK + START + LB Pressed Parameter Up
- BACK + START + LT Pressed Parameter Down
Specification:
- Working voltage: 5V
- Link method: USB Type-C
- Product size: 296mm x 196mm x 128mm
- Supported Platforms: for pc /ps3/ps4/switch/ Android/Steam
Package Included:
- 1 x Keyboard
- 1 x Type-C Data Cable (1.5m)
- 1 x Keycap Puller
- 8 x Anti-slip Pads
- 1 x Crystal Switch
- 3 x 6mm Keycap
- 1 x User Manual
Description:
- This is a leverless controller made of crystal switches, which is completely white and flawless, making it irresistible. The RGB lighting effect has better transparency, allowing you to immerse yourself in the game.
Characteristics:
- Dual core ARM Cortex-M0+ at 133MHz.
- Supported by dedicated QSPI bus, up to 16MB off chip flash memory.
- Fully connected AHB crossover switch.
- Integrated 264kB on-chip SRAM in six independent groups.
- 40nm process node manufacturing, low dynamic power consumption, and low leakage.
- 1ms delay, no frame leakage rate above 95%.
- Supports firmware updates.
Compatibility:
- B: Xinput mode (for Windows/Steam)
- A: SWITCH mode
- X: for PS3 / Dinput mode (for Raspberry Pi / Android)
- Y: for PS4 mode (Compatible with PS4 games on PS5 consoleï¼
- RT: KEYBOARD mode
Input Mode:
- To change the input mode, hold one of the buttons(as shown above) as the controller is plugged in.
- Tips: This product defaults to Xinput mode, input mode is saved across power cycles.
- If there are games that do not compatible the above input modes, you can enter the Web Configurator to modify them for normal use.
Web Configurator:
- This product contains a built-in web-based configuration application which can be started up by holding START when plugging your controller into a PC. Then access http://192.168.7.1 in a web browser to begin configuration.
TURBO:
- Hold TURBO, then press the button which you need to be set for turbo function, then this button will be continuous sending while you press it, to cancel this turbo key, just repeat the previous step.
- The turbo key that set will be cleared when power off.
- These keys can be set as a Turbo key: A / B / X / Y / LB / RB / LT / RT.
RGB LED Setting:
- BACK + START + X Next Animation
- BACK + START + A Previous Animation
- BACK + START + Y Brightness Up
- BACK + START + B Brightness Down
- BACK + START + RB LED Parameter Up
- BACK + START + RT LED Parameter Down
- BACK + START + LB Pressed Parameter Up
- BACK + START + LT Pressed Parameter Down
Specification:
- Working voltage: 5V
- Link method: USB Type-C
- Product size: 296mm x 196mm x 128mm
- Supported Platforms: for pc /ps3/ps4/switch/ Android/Steam
Package Included:
- 1 x Keyboard
- 1 x Type-C Data Cable (1.5m)
- 1 x Keycap Puller
- 8 x Anti-slip Pads
- 1 x Crystal Switch
- 3 x 6mm Keycap
- 1 x User Manual
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Sep 11, 2025 at 23:52:32 PDT, seller added the following information: