Mishimoto Direct Fit Catch Can Kit for 16+ Infiniti Q50 / Q60 3.0L Turbo VR30DDT

BRAND NEW IN BOX

FITMENT

2016+ For Infiniti Q50 3.0T VR30DDTT

2016+ For Infiniti Q60 3.0T VR30DDTT

INSTALL TORQUE SPECS - 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).

NOTES - This kit will not fit with some aftermarket strut tower bars After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

PRODUCT FEATURES

OVERALL HEIGHT - 3.8"

OVERALL DIAMETER - Unspecified

INLET - Unspecified

OUTLET - Unspecified

DRAIN PLUG THREAD SIZE - 3/8" NPT

CAPACITY - 3 fl oz.

MATERIAL - 6061 Aluminum

BAFFLED - True

Single can mounts in line with the PCV system to separate oil from air using a 50-micron bronze filter

Helps reduce carbon buildup on intake valves

Patented (US D884,760 S) billet 6061 aluminum can sealed with Viton™ O-rings

Installs in under 30 minutes

Robust, application-specific bracket mounts the can in a serviceable location

Includes pre-molded hoses for simplified installation

Slotted mounting holes for easier accessibility and servicing

Defends intake system and essential components from oil blow-by

CNC-machined aluminum barbed fittings ensure a sturdy connection between lines and can

Catch can has a 3 oz. capacity for longer servicing intervals

Internal air diverter increases air turbulence to improve oil separation

Helps maintain proper octane levels to reduce potential detonation

Filter and can are fully serviceable

Mishimoto Lifetime Warranty

DESCRIPTION

For Infiniti is no stranger to the luxury sedan segment, taking on the likes of for BMW, for Mercedes, and for Audi. The introduction of their VR30DDTT made the 2016+ for Q50 and for Q60 into a rocket ship and blasted the manufacturer into the stratosphere alongside the typical posh sedans. Luxury is all about the ability to perform, which is where even the most advanced internal combustion engines still suffer. Luckily, we’re here to keep the blow-by off those intake valves with the 2016+ for Infiniti Q50/for Q60 3.0T Direct-Fit Catch Can Kit.

The powerhouse 3.0T equipped in these Infinitis is the prime breeding ground for blow-by and carbon buildup. With the already high compression ratio, combined with a turbo for each bank and a direct injection fueling system, oil and fuel particles have free range to gum up the intake manifold and valves, ultimately diminishing the performance and luxury of your for Q50 or for Q60.

Nestled in the tight engine bay, our 2-port compact catch can design is installed in line with the VR30DDTT’s PCV system to intercept and trap oil and fuel particles from the crankcase before they have a chance to take up residence on the top end components. Our robust mounting bracket places the catch can in an easily accessible location and includes a slotted mounting screw design to take the hassle out of servicing the can. To back up Mishimoto’s superior craftsmanship, each 2016+ for Q50/for Q60 catch can kit comes with the renowned Mishimoto Lifetime Warranty!

Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.

PURCHASE INCLUDES

1) Compact Baffled Oil Catch Can

(1) Application-Specific Mounting Bracket

(2) Direct-Fit Hoses

(2) 3/8" Aluminium Barbed Fittings

(4) Worm Gear Clamps

Mounting Hardware

Mishimoto Lifetime Warranty

WARRANTY

Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.