Size : 12.5cm x 12.5cm x 7.5cm / 4.92 x 4.92 x 2.95" inches
Please note AA Batteries are not included
Steps :
STEP 1 Prepare the following materials: screws (4mm), wires (10cm), connector, double-sided tape, mainboard, speaker, battery box, and screwdriver.
STEP 2 Connect the battery box to the mainboard using the connector. Then connect the speaker to the mainboard. Make sure to match the wire colors correctly.
STEP 3 Explanation of the mainboard functions: The left push switch turns the power on and off. The red button is used for recording. The green button is for playback. The right push switch is for repeating playback.
STEP 4 Assemble the front and back outer frame of the recorder as shown in the image.
STEP 5 Secure the speaker to one side of the inner panel using screws.
STEP 6 Secure the battery box and mainboard to the bottom panel using screws. Fix the connector in place with double-sided tape.
STEP 7 Assemble the left and right side panels to complete the front and back frame from Step 6. When attaching the side panels, make sure the button holes align with the mainboard buttons.
STEP 8
Attach the circular wooden plate with holes to the bottom of the recorder. Do the same for the top side using the same method.
STEP 9 Insert the top handle piece as shown. Do not use too much force as it may break.
STEP 10 Assembly is complete. Now enjoy using your recorder in various creative ways.