ZX9 Series Bulb High Low Beam Combo
 
H7+H7 High Beam & Low Beam:
Product name: headlight High Low Beam
Material: Aviation 6063 aluminum profile
Lighting: white light
Lamp holder: H7
Color temperature: 6000K-6500K
Power: 100W/set(50W/bulb)
Luminous Flux: 20000LM/set,10000lm/per bulb
Lamp beads: CSP lamp beads
Operating Temperature: -40-150 degree Celsius
IP68 rated water and dust seal,360 degree beam angle
Canbus Error Free: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
Please Note: Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
 
Features:

(2pcs/set) CSP headlight conversion kit

Super bright CSP chip(USA), 360-degree clear beam no blind zone

Engineering beam pattern design throw light on the road evenly at an appropriate angle without foggy light

Xenon white light reflect road paint/signs better to show clearer road situation

All-in-one heat conduction+high speed mute fan system keep the light bulb in appropriate working temperature

Built-in constant current CPU, instant full brightness without start-up relay


Easy Installation:
All-in-one aluminum material and design makes it easy to install.
Plug-and-Play direct replacement in 20 mins. No need extra operation and no need to unlock button.
For some cars, had to make little adjustment of the adapter to get proper light beam

 

881 Fog Light:
Product name: Fog Light
Material: Aluminum alloy
Lighting: white light
Lamp holder: 881 885 862 889 894 898
Color temperature: 6000K
Lamp beads: CSP
Fan: none
Features: Four-sided fog lights

Package includes:
6x H7+H7+881 Headlight high & low beam + Fog Light Bulbs

(Random delivery of new and old packaging in the box)

 

Warm Tips:
For Hyundai and For Kia vehicles,
High Beam may be have 2 Size, H1 or H7.
Low Beam may be have 3 Size, H7 or H11B or H11.

 

Install Caution:
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Make sure to have the ignition turned off and the keys removed.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
8.Please install car headlight dust cover to ensure the normal operation of the lamp
 
 
 

Datacaciques