 | Working Principle Dry ice cleaning technology is based on the use of ultra-low temperature dry ice particles, and by compressed airflow, the dry ice particles are hit by the gas at high speed to be cleaned surface dirt. The sudden drop in temperature of the dirt on the surface causes the surface to become brittle while causing these extremely low-temperature dry ice gases to enter inside the cracked contaminants. When surface dirt is hit, the dry ice particles quickly sublimation to gas and these cracked contaminants are peeled away from the surface of the object and removed. |
AUTOOL HTS709 dry ice blaster applied in the field of automotive servicing, in which the dry ice particles are accelerated by the airflow at high speed to remove the carbon buildup. The cleaned dry ice will vaporize in the ambient, which is safe and residue-free and will not damage the vehicle. It can be used for the cleaning of carbon deposits in the engine compartment, cylinder combustion chamber, intake valve, throttle valve, and etc. Note: This dry ice blasting machine do not produce dry ice. You need to buy the dry ice from your local. The size of dry ice pellets used in this machine is 3mm. This dry ice cleaning machine needs to connect external air compressor. For the air compressor, the air pressure requires 6 Bar or more and the gas storage tank requires 300L; air compressor power 7.5kw. The parcel includes an air connection hose that connects to the compressor in 1/2 size. Please note that you must connect this air hose directly to your compressor, the use of additional adapters is prohibited. This dry ice blaster doesn’t run on a single phase. The socket must connect with earth wire. |
 |  |
| High-Efficiency Cleaning HTS709 dry ice blasting machine adopts dry ice cleaning tech, which accelerates the dry ice particles through high-pressure airflow and impacts the deposits, thus removing the carbon buildup thoroughly. It can fully clean the carbon deposits in all vehicle parts without disassembling them as well. | Dual Pressure Gauge Design HTS709 Dry Ice Blaster with with both input and output pressure gauges, allowing for precise and safe operation.You can freely adjust the pressure and speed according to your own needs to achieve the best removal effect. |
 |  |
| Non-Destructive Cleaning The dry ice cleaning machine can completely remove the attached dirt, and can also reduce the disassembly and damage to the equipment, avoid affecting the operation and use of the equipment during cleaning, and fundamentally protect the equipment and improve productivity. | Widely Used The dry ice cleaning machine is widely used in various industries such as rubber, casting, automobile, shipbuilding, electric power, chemical industry, printing, plastics, food, pharmaceuticals, aviation, etc., not only limited to automobile maintenance. |
 |
 | Analysis and processing method: Stop the operation and open the cover to see if there is too much dry ice filling. If there is too much dry ice, take out part of the dry ice Come out, and then work. The ice blocking of the dry ice pipe is caused by the intermittent shutdown due to intermittent use, and then immediately shut down, resulting in residual ice in the ice outlet pipe. Leave dry ice and compressed air to cause icing, if it is indeed this working condition 1. First adjust the amount of ice output to 0, then Turn on the spray gun switch and keep it on for 3 minutes, then adjust the ice output to 20%-30%, and then see the ice effect. |
 | Operation Steps: 1). Connect the air source and power supply; 2). Connect the ice blasting gun; 3). Connect the ground wire; 4). Add in dry ice and turn on the power and adjust the amount of dry ice; 5). Start Cleaning. Package Include: 1 x HTS708 dry ice cleaning machine 1 x Intake hose & Ice outlet pipe 1 x Rotatable ice spray handle 4 x Ice spray gun 1 x Earplugs & Ice shovel 1 x Safety goggles & gloves 2 x Fuses & ground clip wire 1 x Ground wire connector & user manual |
