RadioMaster RC Plane Gyro NEXUS-X Helicopter Gyro 2.4GHz 5-16V/DC 256MB Flash Support CRSF ELRS GHOST S.BUS SUMD IBUS XBUS EXBUS PPM MSP Receiver
Features:
1. Optimized for Rotorflight 2.2: Ultimate performance and compatibility.
2. Precise control: STM32F722 and ICM42688P 6-axis motion sensors deliver superior flight dynamics performance.
3. 256MB flash memory capacity: Double the capacity to record more flight data for fine-tuning.
4. Connection versatility: Features a multi-functional UART interface supporting CRSF, ELRS, S.BUS, and more.
5. Plug-and-play ExpressLRS receiver: No soldering required, compatible with the RP3-H ExpressLRS receiver (sold separately).
6. Additional PWM pins: Enable effective control even in complex setups.
7. CNC metal housing: Not only protects internal components but also acts as a heat sink to keep electronic devices cool.
8. Locked tail servo/motor: Supports 760us and 1520us output high-voltage servos, compatible with various tail motor drive systems.
9. 12V servo support: Compatible with more high-voltage servo applications.
10. Wider battery voltage range: Supports voltages from 3.6V to 70V, compatible with more power systems.
11. Upgraded BEC: Provides stable and reliable power transmission, delivering an unprecedented flying experience.
12. Multi-channel independent power supply design: Includes 1.8V for the gyro, 3.3V for the MCU, and 5.0V for external interfaces, minimizing noise interference.
13. USB-C: Includes an ultra-lightweight, flexible USB-C extension cable for easy connection when the USB-C port is hard to reach.
14. Lightweight, compact design: Easily compatible with multiple levels of helicopters.
15.Built-in RotorFlight rescue mode: Enhances safety in case of emergencies.
Description:
NEXUS-X Optimized for Rotorflight 2.2,Ultimate performance and compatibility,256MB flash memory capacity,STM32F722 and ICM42688P 6-axis motion sensors deliver superior flight dynamics performance,Support CRSF ELRS GHOST S.BUS SUMD IBUS XBUS EXBUS PPM MSP Receiver.
Specifications:
Product: Nexus-X Helicopter Gyroscope
Firmware: Rotorflight 2.2
MCU: STM32F722RET6
Gyroscope (IMU): ICM42688P
Flash Memory (Black Box.IC): 256MB (W25N02KVZEIR)
Built-in Barometer: SPL06-001
UART Interfaces: 5 - S.BUS[UART1], TELEM[UART2], PORT-A[UART4], PORT-B[UART6], PORT-C[UART3]
Servos: S1, S2, S3, Tail Lock (Supports up to 12V)
RPM Sensor: 1 - From ESC RPM Sensor
AUX: 1
External Voltage Input (Power Detection): 3.6-70V
Supported Receivers: CRSF, ELRS, GHOST, S.BUS, SUMD, IBUS, XBUS, EXBUS, PPM, MSP
Supply Voltage (DC): 5 - 16V
A-B-C Serial Port Power Output: 5V - 1.5A
Telemetry: S.BUS, HoTT, S.Port, MSP, EDGETX, ELRS
ESC Speed Control: PWM, Oneshot, Multishot, Dshot
Supported Tail Servo: 760μs/1520μs servo
Supports tail motor drive: Yes
Dimensions: 44.70 x 26.50 x 12.30 mm
Weight: 20.6 g
Translated with DeepL.com (free version)
Package contents:
1 * Nexus-X helicopter gyroscope
3 * JST-GH 4P wiring
1 * JST-GH 3p servo motor wiring
1 * USB-C extension cable
1 * Type C extension cable
1 * JST-ZH1.5 "DSM" return cable
1 * Voltage return line
3 * 3M double-sided installation tape
2 * Heat shrink tubing
1 * List card
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.
Features:
1. Optimized for Rotorflight 2.2: Ultimate performance and compatibility.
2. Precise control: STM32F722 and ICM42688P 6-axis motion sensors deliver superior flight dynamics performance.
3. 256MB flash memory capacity: Double the capacity to record more flight data for fine-tuning.
4. Connection versatility: Features a multi-functional UART interface supporting CRSF, ELRS, S.BUS, and more.
5. Plug-and-play ExpressLRS receiver: No soldering required, compatible with the RP3-H ExpressLRS receiver (sold separately).
6. Additional PWM pins: Enable effective control even in complex setups.
7. CNC metal housing: Not only protects internal components but also acts as a heat sink to keep electronic devices cool.
8. Locked tail servo/motor: Supports 760us and 1520us output high-voltage servos, compatible with various tail motor drive systems.
9. 12V servo support: Compatible with more high-voltage servo applications.
10. Wider battery voltage range: Supports voltages from 3.6V to 70V, compatible with more power systems.
11. Upgraded BEC: Provides stable and reliable power transmission, delivering an unprecedented flying experience.
12. Multi-channel independent power supply design: Includes 1.8V for the gyro, 3.3V for the MCU, and 5.0V for external interfaces, minimizing noise interference.
13. USB-C: Includes an ultra-lightweight, flexible USB-C extension cable for easy connection when the USB-C port is hard to reach.
14. Lightweight, compact design: Easily compatible with multiple levels of helicopters.
15.Built-in RotorFlight rescue mode: Enhances safety in case of emergencies.
Description:
NEXUS-X Optimized for Rotorflight 2.2,Ultimate performance and compatibility,256MB flash memory capacity,STM32F722 and ICM42688P 6-axis motion sensors deliver superior flight dynamics performance,Support CRSF ELRS GHOST S.BUS SUMD IBUS XBUS EXBUS PPM MSP Receiver.
Specifications:
Product: Nexus-X Helicopter Gyroscope
Firmware: Rotorflight 2.2
MCU: STM32F722RET6
Gyroscope (IMU): ICM42688P
Flash Memory (Black Box.IC): 256MB (W25N02KVZEIR)
Built-in Barometer: SPL06-001
UART Interfaces: 5 - S.BUS[UART1], TELEM[UART2], PORT-A[UART4], PORT-B[UART6], PORT-C[UART3]
Servos: S1, S2, S3, Tail Lock (Supports up to 12V)
RPM Sensor: 1 - From ESC RPM Sensor
AUX: 1
External Voltage Input (Power Detection): 3.6-70V
Supported Receivers: CRSF, ELRS, GHOST, S.BUS, SUMD, IBUS, XBUS, EXBUS, PPM, MSP
Supply Voltage (DC): 5 - 16V
A-B-C Serial Port Power Output: 5V - 1.5A
Telemetry: S.BUS, HoTT, S.Port, MSP, EDGETX, ELRS
ESC Speed Control: PWM, Oneshot, Multishot, Dshot
Supported Tail Servo: 760μs/1520μs servo
Supports tail motor drive: Yes
Dimensions: 44.70 x 26.50 x 12.30 mm
Weight: 20.6 g
Translated with DeepL.com (free version)
Package contents:
1 * Nexus-X helicopter gyroscope
3 * JST-GH 4P wiring
1 * JST-GH 3p servo motor wiring
1 * USB-C extension cable
1 * Type C extension cable
1 * JST-ZH1.5 "DSM" return cable
1 * Voltage return line
3 * 3M double-sided installation tape
2 * Heat shrink tubing
1 * List card
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.
