|
Description:
|
Better quality—Simple and stable structure.
|
|
Flexible—Light in weight with easy operation.
|
|
Effective—permanent and effective current with high operation efficiency.
|
|
Safe—Electric leakage protection device and anti-backfire design ensure the safety.
|
|
This Flame Polishers have better quality , performance and service to make contributions to the society.
|
|
Energy saving—The electrolyser adopts the advanced serial-to-paralleled system, which reduces the energy consumption and increases electrolyzation efficiency.
|
|
|
Feature:
|
Strong and durable, light weight and portable.
|
|
The edge polished by this machine is smoothy and shiny.
|
|
Take water (distilled water and pure water) as fuel, economical, environmental protection and obtained easily.
|
|
The design of "low working voltage, cut off automatically beyond the set voltage", makes the machine safer and save more energy.
|
|
It is used widely to cut and fuse metal nicety parts, mending and fuse tooth-mould, fuse directly the motor rotor's wire lacquered, polish acrylic irregular surface, fuse LED wafer, weld gold & copper as well as metal parts heat-treatment partly.
|
|
|
Parameter:
|
Weight:8.5kg(1 set).
|
|
Cell capacity:1000ml.
|
|
Dimension:480*280*360mm.
|
|
Gas Generation:75L/hour.
|
|
Voltage:AC110V(if you need 220V click here).
|
|
|
Application:
|
Heat treatment for metal parts.
|
|
Weld the hinge of spectacles rim.
|
|
Cut and fuse quartz or fine parts etc.
|
|
Fuse the lead or tin alloy plate for storage battery.
|
|
Peel off FPC of computer, fuse LED chip and thermocouple.
|
|
Seal the injection glass bottle, conforming to GMP industrial standards.
|
|
Polish irregular acrylic surface. After polish, the work piece will be smooth and shiny.
|
|
Weld jewelry made of gold, silver, copper, lead, tin casting etc, such as stud, safety pin, chain etc.
|
|
Operation:
1.Dissolving Electrolytic Powder
Add water and electrolytic powder(NaOH or KOH into the container and stir, and then cool off for 10 minutes.The ratio of electrolytic powder and water is 1:5.
2.Adding electrolytic solution
(1)Unscrew the nut of water inlet
(2)Fix funnel to avoid the leakage of electrolytic solution
(3)Pour the electrolytic solution into electrolysis trough
(4)It could be better to add the solution up to 90%
(5)Screw nut of water inlet
3.Adding filter agent
(1)Turn left and unscrew the filter cup
(2)Add filter agent into the filter cup, less than 1/2
(3)Install the filter cup to its upper cover and screw it.
4.Power-on Test
(1)Connect flame gun to gas outlet using rubber tube. Choose proper nozzle according to the size of raw edges
(2)Turn on the power, if the indicator light works, blower shifts, and at the same time, turn off flame gun and the pressure value increases, all is normal.
(3)Light with direct fire, let the flame point to raw edges directly or tiltedly and keep proper distance, and then scan raw edges evenly.
|
Note:Electrolyte power (NaOH or KOH) is forbidden by express company, so we could not put it into the package. You can buy it from local chemicals paint.
|
|
What in Package:
|
1 x Manual.
|
|
1 x Funnel.
|
|
1 x Flame Gun.
|
|
1 x Power Line.
|
|
1 x Rubber hose.
|
|
1 x H160 Machine.
|
|