DESCRIPTION
Edelbrock Performer Intake Manifold For Chevrolet 262-400 Small-Block V8 is Designed for 1986 & Earlier Street Application. Accepts (4150-Style) Edelbrock or Q-Jet Carburetors. Non-EGR
DETAILS
Edelbrock part #2101 Performer intake manifold is designed for street 1955-86 small-block Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. The Performer intake manifolds are ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs. Not for 1987 and later cast iron or Chevy Bowtie heads. Will fit 1987 and later stock aluminum heads.
SPECS
|
Availability |
Available |
|
Application |
Application Specific |
|
UPC |
00085347021017 |
|
Series |
Performer |
|
Grade Type |
Performance |
|
Gasket Or Seal Included |
No |
|
Vehicle Model |
Chevrolet |
|
Availability Note |
Available |
|
Warranty |
12 Months |
|
Ec Basic Operating Rpm Range |
Idle-5500 RPM |
|
Emissions Code |
Racing Only – Engine Swap – Pre Pollution Controlled Vehicles |
|
Hazardous Materials Warning |
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. |
|
Installation Notes |
• Manifold height: A-3.50", B-4.60"; Carb pad height: 4.05"; Carb recommendations: OEM 4-Bbl, Use choke rod #9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket #8031 or #8036 for 1972-1978.; Port exit dimensions: 1.14" x 1.88"; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Choke plate #8901 included; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. |
|
Center Maximum Height |
4.050 in |
|
CNC Ported |
No |
|
Finish |
Satin |
|
Front Maximum Height |
3.500 in |
|
Material |
Aluminum |
|
Rear Maximum Height |
4.600 in |
|
Single Or Dual Plane Type |
Dual |
ABOUT THE MANUFACTURER
Founded in 1938, Torrance-based Edelbrock, LLC is recognized as one of the nation's premier designers, manufacturers and distributor of performance replacement parts for the automotive aftermarket. Edelbrock produces their core products in the United States of America using state-of-the-art equipment in their world class manufacturing facilities. Edelbrock, LLC encompasses five locations in Southern California and one location in North Carolina totaling more than 500,000 square feet.
Edelbrock Corporation has six locations: Three in Torrance California, two in San Jacinto, California, and one in Sanford North Carolina totaling over 500,000 square feet. Torrance Headquarters include: R&D; manufacturing; state-of-the-art testing facilities, advertising and tech support. Less than a mile away is Russell Plumbing and our Distribution Center.
Our Aluminum Foundries are located close by in San Jacinto. In 2008 we added a new Permanent Mold and Heat Treat facility next to our existing sand cast foundry, which has been called "the most state-of-the-art sand cast foundry west of the Mississippi." This investment in American facilities is part of our commitment to "Made in USA" products and performance.
Mom of 2, hard working, innovative and perfection addict. We provide the best customer service in the market for all car enthusiasts. Please do not hesitate to get in touch with us for all your parts needs. Thank you for shopping with us!
We require that all payments be paid through PayPal. Your address must be confirmed. We always look to satisfy our customers in whatever needs they may have. Please contact us if you have any questions. International Buyers, please contact us before bidding to discuss the shipping cost. Shipping charges are non-refundable. We always look to satisfy our customers in whatever needs they may have. Please contact us if you have any questions.
After receiving the item, contact seller within 60 days Refund will be given as Money back or replacement (buyer's choice) Buyer pays for return shipping. Refer to eBay Return policy for more details. You are covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing.
We ship with FEDEX/UPS/USPS ground service unless instructed to do differently. We also offer expedited shipping at an extra cost. International shipping rate applies to addresses in all other locations Custom/duty/brokerage fees, if any, on Canada and international orders are the responsibility of the buyer. Item ships within one business day after the payment has cleared or same day if paid by 12pm PST. Item is in stock ready to ship. Item purchased is shipped from San Diego or East Coast Warehouse. Local pickups are welcome for this item. We strive to ship your order in a prompt manner to meet the criteria for shipping time that we specify in the Item information. We offer a variety of shipping options based on what product you are purchasing and your desired time frame for delivery to meet the needs of all of our customers. Shipping charges are non-refundable. We will gladly combine shipping charges to one charged based on the total weight of the package. There's a surcharge for shipping to USPS PO Box and AF/APO boxes, please contact prior to purchase to check shipping fees.