1996-2003 4L60E 4L65E Rebuilt Pump Assembly - Complete

How To ID:

• PWM (Pulse Width Modulated) Type
• Has Lip for Bolt-on Bell Housing
• Uses O-Ring on Pump OD
• Stator Casting # Last 3 Digits are: 611 or 705
• Pump Body Casting # Last 3 Digits are:  073 or 555

If you are unsure if you have the 298mm 4L60E PWM pump measure ( see picture ) the shaft from the oil seal to the top of the shaft.

• If it's under 1.75" you have a 298MM type pump.
• Over 2", you have the 300mm type pump.

 

The pump is completely disassembled, inspected for wear & damage, and cleaned.

All parts are checked to make sure they still meet OE specs. If not they are replaced.

A professional transmission rebuilder assembles the pump.

 

Minimum Parts Replace Every Time

• Torque converter bushing
• Torque converter Seal
• Teflon rings
• Other hard parts are replaced as needed

Items Included In Listing

• Complete pump assembly
• Pump to case o-ring
• Pump to case gasket