|
Features:
* Universal composite for anterior/posterior dentine
and enamel
* High radiopacity
* Fluoride release
* High strength (compressive strength>480MPa)
INDICATIONS FOR USE:
* Direct anterior and posterior restorations
* Compatible with glass ionomer resin material
* Cup buildup
* Core buildup
* Indirect anterior and posterior restorations
including inlays, onlays and veneers
Color Available: A1, A2,A3, A3.5, B1
If you need other shade, pls note us in your
order.Thanks in advance!
&
Denterx etching gel is a polymer thickened gel for use on enamel and dentin.
This gel will effectively treat enamel and dentin, producing the necessary microretentive surface for successful bonding. The polymer thickener creates thixotropic properties, enhancing handling characteristics. The etchant rinse away cleanly and quickly, leaving no residue.
Packages: Refill: 5 ml/syringe, Instruction X1
Indications:
Treat dentin and enamel, Treating agent on dental restorative material.
1. Isolate tooth and then prepare the cavity in a conservative manner. clean the entire surface with a slurry of pumice and water.
2. Apply etchant using a tip, a disposable syringe tip, or disposable brush tip. allow etchant to remain in palce for 15 seconds. etching time should be monitored with a stopwatch. begin timing at the end of application.
Option: place etchant enamel first, then proceed to cover dentin, for a slightly longer enamel etching time.
3. Rinse thoroughly (at least 5 seconds) to completely remover all traces of etchant.
4. Remove exces moisture from the tooth and proceed with the applicaton of etching gel, waiting for 10 seconds, then rise thoroughly. then apply adhesive
&
Describe：
This product is a one-component liquid, and its main
ingredients include UDMA and other multifunctional methacrylic resins. It does
not contain solvents and inorganic fillers, and is safe and harmless to the
human body. The product is a light-curing adhesive material, which is
clinically used for the bonding of dentin and enamel. Suitable for bonding
resin materials and ceramic materials.
Scope of application：
Used for bonding dentine and enamel with resin and ceramic materials.
Clinical operation steps:
1. Pretreatment of caries and pulp protection.
2. Use 37% acid etchant for treatment, then clean it
thoroughly with water, and dry it thoroughly with an oil-free air gun.
3. Apply a layer of adhesive evenly on the tooth surface with a
small brush.
4. Make the adhesive layer even as far as possible with the wind
power of the air gun.
5. Irradiate with an oral light curing light source of 300mW/c㎡ for 20 seconds to cure
the adhesive.
6. Please use the composite resin filling material according to the
original manufacturer's instructions, as well as the subsequent grinding and
reconstruction processes.
Precautions：
1. During clinical use, the lip and adjacent teeth should be well isolated
and protected. Avoid contact with eyes, mucous membranes and skin.
2. Phenols, clove oil and zinc oxide can not be used as the bottom
material of the first layer,because clove oil contains polymerization inhibitor
"phenolic substances", which will directly affect the degree of
polymerization of the adhesive.
3. During the curing operation, the distance between the surface of the
light curing lamp and the adhesive should be kept below 2mm, but it should not
be in contact with the material.
4. Before applying adhesives and composite resin fillings, the tooth
treatment surface should avoid contamination by water and other impurities.
5. It is not suitable for pulp capping, and patients who are allergic to
resin should not use it.
Environment：
This product is operated at room temperature.
Storage Conditions：
This product should be stored in a cool and dry place at 2°C~28°C,
avoiding direct sunlight.
Shelf Life：
This product is valid for 2
years, please do not use expired product.
Contraindications:
Patients with a history of
allergy to methacrylate resins are contraindicated.
|
