Upgrade your Mspa hot tub with this high-quality circulation pump, designed to ensure crystal-clear & fast heating water throughout your spa. This pump is compatible with all 2021-26 Mspa models, including the Frame, Comfort, Premium, Muse, Urban, Delight, Elite Series and more. With a capacity of 1800L/hr, this pump is incredibly efficient and effective at filtering out dirt, sand, and other debris from your spa water. easy to install and includes technical support & repair video(s) available to our customers. Get ready to enjoy a cleaner and healthier spa experience with this circulation pump from Mspa.

This pump is repair solution for Mspa hots tubs experiencing F1 / E1 error code

This means your MSpa pump is experiencing a water flow issue. We recommend following these trouble shooting steps until the error code stops displaying.

  1. Check water level

    The water flow sensors will not detect the water properly if the water is below the minimum line on the spa liner. Top your MSpa up with water so the water level is between the Minimum and Maximum line.

    If the E1/F1 error is still showing on your controller, please move onto step 2 below.

  2. Check filter cartridge

    This error can be caused by a heavily-used filter cartridge decreasing water flows. Cartridges can last 2-3 weeks before needing to be replaced, depending on spa usage, water chemistry and maintenance practices.

    1. Remove the filter cartridge from the filter housing.

    2. Use moderate pressure from a regular garden hose and maintain at least a 45 degree angle to avoid damaging the filter. Place emphasis in flushing the debris out from between the pleats. You can also carefully brush the pleated surface to remove small particles and debris.

    4. Check debris screens (water inlet and outlet cover)

    5. Another cause of this error code is a debris build up in debris screens. They are designed to prevent any particles, debris or hairs from getting into the pipes and pump. Unscrew the inlet & outlet caps with screwdriver and remove the debris with toothbrush
Unsure of of what parts are need to repair your issue. Contact us with the serial number of your spa and we will be happy to help (See photo in listing for information on where to find your number)