


Specification:
Power supply voltage: 220V AC 50 HZ 110v60HZ
Power: 150W
Effective volume: 500ml
The vacuum degree is less than or equal to 0.085 Mpa
Weight: 25 Kg
Shock mode: stepless adjustable
Appearance size: length * width * height
34cm*32cmcm*46cm
Stirring rotation speed: 270 r/min
Features:
1.Vacuum Mixer is essential equipment for mixing and vibrating investment materials and molded materials in dental laboratory.
2.As the mixing process is done in a vacuum state,the workpiece is free of bubbles and the firmness and compactness of the mold has also been improved.
3.This machine uses a high class vacuum pump which gives it a longer lifespan.
4.It has the following characteristics: high vacuum power, strong mixing power, and adjustable vibration amplitude, no bubbles in invested casting rings, homogeneous, high density and high quality.
The build-in vibrator makes it a multi-function machine.
Usage:
1. before using will join the vacuum pump, vacuum oil gas to oil level line, when the pump is running oil should remain within the scope of the oil level line 5 mm up and down, the oil level is too low will degrade the performance of the pump, the oil level is too high can cause oil mist jet.
2. Turn on the power.
3. first to advance to stir paste mixing tank materials, after mixing tank and set a butt, and nudge into the slot, armed with mixing barrel, tighten vent needle valve, stir to press the vacuum switch, switch, at this time under the working condition for vacuum stirring, can let go of the hand, stirring time since.
4. Turn off the power switch after stirring, hold the mixing tank, and release the air needle valve.
5. Adjust the amplitude knob if needed.
Notes:
1. Prior to the use of each type of mixer, it is necessary to read the instructions carefully, understand its use steps and precautions, and prevent unnecessary damage to the equipment.
2. Before use, the vacuum pump must be refueled (type 3 needs to be opened for refueling), and no oil operation is strictly prohibited.
3. The vacuum pump is strictly prohibited to operate in no-load state, so as not to affect the service life of the machine.
4.If the machine is out of order, please find an experienced professional to repair it.
5. Regularly check the safety grounding of the machine. The protection grounding in the power supply plug switch between the power grid and the equipment should be well grounded.
6. The embedding material in the mixing tank must not exceed half of the volume, so as to avoid the gas road blockage caused by the embedding of the embedding material.
Packing list:
1 * main engine,
1 * vacuum pump (3 type built-in vacuum pump),
1 * power cord
1 * mixing tube
1 * set of stirring shovel,
2 * insurance tubes
1 * instruction manual.







