Trim/Tilt Pin Wrench AMT0006-32mm x 4.5/4mm Remove Trim/Tilt Caps on Hydraulic Cylinders for Yamaha Suzuki Johnson Evinrude Outboards
Features
- Application - Trim Caps on ALL SHOWA manufactured Trim/Tilt Units for Yamaha ,Evinrude.
- High Quality Material--Our pin wrench has a 200 ft-lb MIN Pin Strength, Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use. High precision and hardness ensure long-term service.
- Function--To rebuild a leaked device on outboard engine, hydraulic trim and tilt unit .Used to remove and install the Trim and Tilt Caps without damaging it and the steering cylinder
- A Must Have--Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you finish that case with ease
- Satisfaction Gurantee - If you have any dissatisfaction during use with our products.You can request a full refund within 30 days to support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
Product description
FITMENT
for Trim Caps on ALL SHOWA manufactured Trim/Tilt Units
for Trim Caps Yamaha F115-F150
for Trim caps ALL Yamaha I4 2.8L (F175-F200)
for Trim Caps Yamaha 2-Strokes (115-225hp)
for Trim Caps on ALL Yamaha VMAX
for Trim Caps All Suzuki,Johnson, Evinrude
Equivalent Factory Tool:
YB-06175-1A
YB-06548
A Must Have Tool
This professional quality tool is required to remove the nut on the trim and tilt cylinder.
Easily rebuild a leaked device on outboard engine, hydraulic trim and tilt unit. Save money and time.
Built to Last
Made of hardened stainless steel coated with silver finish for extended longevity and durability, great looks and solid construction make this an outstanding upgrade over your OEM # YB-06175-1A!
Features
Direct replace OEM# YB-06175-1A
Replaceable Hardened Stainless Steel Pins with Gripping Teeth for added security
1/2" Socket Drive - 46m-lb Torque Rating.
180 ft-lb MIN Pin Strength
Easy to Use
1. TRIM: Remove and reinstall the trim sub-assemblies, replace the trim cap seals, replace sub-assembly O and backer ring.
2. TILT: Remove and reinstall the tilt sub-assembly, tear down and rebuild of the tilt sub-assembly including removal of the tilt valve body and the cap, remove and reinstall the valve body parts, replace the tilt cap seal, replace the tilt valve body O and backer ring, replace the tilt valve body internal O and backer ring.
Package Included
1 × Marine Pin Wrench（32 mm x 4 mm）
6 × Removable Pins（4mm）
