Note: If you are unsure about a product before purchasing it, please contact me first to help you answer your questions before making a purchase. After receiving the goods encountered problems (the product will be rechecked and tested before sending, the probability of a problem is one percent) / do not know how to use, please contact me for you to operate remotely.

Cost-effective 8 channels oscilloscope for vehicle testing; 2.4MSa/s, 12bits; DAQ card function; 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.

Vehicle Testing:

• First Diagnosis: Intake manifold vacuum & ignition, Petrol fumes adjusting valve vacuum & ignition, Idle exhaust ignition, Starting exhaust ignition.
• Ignition: primary and secondary.
• Sensor: Air Flow Meter, Camshaft, Crankshaft, Distributor, Lambda sensor, Throttle position.
• Bus Diagnosis: CAN bus data examine, CAN bus signal integrity, CAN bus LH long time acquisition, LIN bus.
• Performer: Petrol/Diesel.
• Starter and charging circuits.

Oscilloscope:

• 8 channels oscilloscope, 2.4MSa/s real time sampling rate.
• 12 bits vertical resolution, spectrum analysis function.

Programmable Generator:

• 8 channels programmable generator.
• Can analog signals of crankshaft, camshaft etc.

Others:

• USB 2.0 interface plug and play, and no need extra power supply;
• More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
• Software support: Windows 7, Windows 8，Windows 10

Specifications:

Oscilloscope Mode
Vertical System
Analog Channel	8
Input Impedance	Resistance: 1MΩ
Input Sensitivity	10mV/div to 5V/div
Input Coupling	DC
Resolution	12 bits
Horizontal System
Memory Depth	4K
Max. Input	400V (DC+AC Peak)
Real-Time Sampling Rate	2.4MSa/s
Time Base Range	1ns/div to 20000s/div(1-2-5sequences)
Time Base Precision	±50ppm
Trigger System
Time Base Range	1ns/div to 20000s/div(1-2-5sequences)
Time Base Precision	±50ppm
Trigger Source	CH1, CH2, CH3, CH4, CH5, CH6, CH7, CH8
Trigger Mode	Edge
X-Y Mode
X-Axis Input	CH1
Y-Axis Input	CH2
Cursors and Measurement
Voltage Measurement	Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase,Vavg, Vrms, Vcrms, Preshoot, Overshoot
Time Measurement	Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Cursors Measurement	Horizontal ,Vertical, Track, Auto Measure Modes
Waveform Signal Process	+,- , x,÷, FFT, Invert
Voltage Range	10mV to 5V/div @ x 1 probe 100mV to 50V/div @ x 10 probe 10V to 5000V/div @ x 1000 probe 100V to 50000V/div @ x 10000 probe 200mV to 100V/div @ 20:1
Current Range	100mA to50.0A/div @ CC65(20A) 1000mA to500.0A/div @ CC65(65A) 1A to100.0A/div @ CC650(60A) 1A to200.0A/div @CC1100(100A) 10A to2000.0A/div @CC1100(1100A)
FFT	Rectangular, Hanning, Hamming, Blackman Window
Math	Addition, subtraction, multiplication, division
Programmable Generator
Channel	8
Output Level	LVTTL
Frequency Range	0-250kHz
Interface	USB 2.0
Power	No need extra power supply
General
Size	185 * 150 * 27mm / 7.3 * 5.9 * 1.06in
Weight	319g / 11.28oz
Package Size	23 * 17 * 7.5cm / 9.05 * 6.7 * 2.95in (L * W * H)
Package Weight	915g / 32.29oz

Package List:
1 * 1008C DAQ oscilloscope
8 * Crocodile probes/cable
1 * secondary ignition probe
1 * USB Cable
1 * CD