Type A-1500ml
Product Name: Hydrogen-rich portable pot
Product material: platinum sheet/food grade PC/SPE film
Capacity: 1500ml
Hydrogen concentration: 1200ppb-2400ppb
Battery capacity: 1500mAh
Hydrogen production time: 6min
Hydrogen production times: 10 times
Charging method: USB
Net weight: 260g
Hydrogen water absorbs into your body easily to boost your metabolism and increase the body's micro circulation.
The Q12 hydrogen water generator makes the water in a high hydrogen concentration from 1200ppb-2400ppb,ORP from -200mV to -600mV.Most Important,with its high quality of USA DUPONT N117 membrane,it puts only pure H2 into the water. Oxygen, Ozone and Chlorine are separated out. So the hydrogen water you get is 99.99% pure H2 and NO Chlorine,No Oxygen,No H2O2,NO Ozone. portable for travel,work and office. Any kind of water can be used:Mineral Water,Pure Water,and Distilled Water is welcomed.Additionally,this machine uses PEM and SPE technology to make pure 99.99% H2 hydrogen.
How to use:
1. Pour an appropriate amount of drinking water into the bottle
2. Tighten the bottle cap and invert the kettle
3. Turn on the switch to start hydrogen production
4. Let it stand for 6-18 minutes, the longer the time, the higher the hydrogen concentration
=====================================================================================================
Type-B 420ML
| |
|
|
Product name: Hydrogen-oxygen separation hydrogen-rich cup
Voltage/Electricity Rate: Applicable 100- -240V/50-60HZ
Product capacity: 420ml
Full power usage times: 15-20 times
Appearance size: 7*21CM/2. 76*8.27in
Rated voltage: 220V
Power consumption: 5W
Hydrogen concentration: 800-900PPB
Charging time: 2-3 hours
Working time: 3 minutes/1 time
Color: Silver
How to use it ?
Step 1. Install drinking water, first charge mineral water.（The lid of the water cup needs to be opened when producing hydrogen.）
Step 2. Just press once, the blue light will light up, 3 minutes hydrogen will be generated and the system will shut down automatically.
Step 3. Press for three seconds to turn off the device automatically. All lights are off and the machine is off. When there is no power, the water cup will flash red, the light will be red when charging and the light will turn blue when fully charged.
Step 4. Turn the glass counter-clockwise after the scale on the electrolyte film is generated. After cleaning, turn it clockwise to tighten the glass.
Please note:
1. If you notice any cracks in the product during the first use, please contact us. If there is no problem, please charge the product for 3 hours. Please disconnect the charger after the product is fully charged.
2. Do not use juice or drinks.
3. The water temperature should be below 60 °C.
4. Please charge when empty, and do not use it when charging.
5. When using for the first time, some water may remain close to the bottle. This is residual water for factory inspection and does not cause health problems.
6. If the water quality is too hard, causes deposits and affects hydrogen generation, please wash it with white vinegar.
7. Please open the lid of the water cup when producing hydrogen
8. Pour mineral water into the water cup, but not pure water, because pure water cannot be electrolyzed.
Product List:
1 x Hydrogen Water Generator
1 x USB Line
1 x Manual
