Grazie alla tecnologia PurePath, si ottengono ottimi risultati in termini di efficienza, qualità sonore e consumo di corrente.
Infatti questo tipo di amplificatori hanno una ottima qualità audio ed un minimo sviluppo di calore, poiché il rendimento ottenuto è superiore al 90%.
Inoltre la corrente utilizzata varia in base alla richiesta di potenza, con dei consumi minimi quando non c'è riproduzione.
Il riscaldamento di questi moduli è minimo, quasi da non doverli nemmeno raffreddare con feritoie per il cambio dell' aria ecc.
La qualità audio è di tutto rispetto, se si considera la potenza sviluppata con distorsione dello 0,01% di ben 125Wrms 4ohm
140W 4ohm 1%THD+N
175W 4ohm 10%THD+N
11dBA dynamic range
NB:
IL MODULO VIENE SPEDITO CON L'INGRESSO SETTATO SU "BILANCIATO", SE SI DESIDERA UTILIZZARLO CON IL SEGNALE "SBILANCIATO" SI DOVRANNO SPOSTARE LE DUE FORCELLE DIETRO AI CONNETTORI DI INGRESSO SULLA POSIZIONE "SE"
Per qualsiasi ulteriore informazione in merito, oppure per avere anche un alimentatore adatto, vi prego di contattarmi.
GRAZIE.
CONTATTI.
EMAIL: starservicestella@gmail.com
PHONE: +39 338 8816612
Di seguito alcune caratteristiche dichiarate dal costruttore:
Overview
EAUMT-0140-2-A
is a 2 channel (BTL) high quality class D audio amplifier module base
on TPA3251 with customized design and mainly suit for both consumer and
professional project.
TPA3251
is a high performance class-D power amplifier that enables true premium
sound quality with class-D efficiency. It features an advanced
integrated feedback design and proprietary high speed gate driver error
correction (PurePath™ Ultra-HD). This technology allows ultra low
distortion across the audio band and superior audio quality. The device
can drive up to 2 x 175 W into 4-Ω load and 2 x 220 W into 3-Ω load.
In
addition to excellent audio performance, TPA3251 achieves both high
power efficiency and very low power stage idle losses below 1 W. This is
achieved through the use of 60 mΩ MOSFETs and an optimized gate driver
scheme that achieves significantly lower idle losses than typical
discrete implementations.
With
improved design to obtain highest performance and lowest noise and
distortion, this module provide an excellent audio solution that highly
compact and efficiency with state-of-the-art performance
Key Features
- < 65uV Output Noise (AES17,A-weighted)
- 140W @ 1% THD+N, 1kHz, 4Ω
- 175W @ 10% THD+N, 1kHz, 4Ω
- 111dBA dynamic range
- THD+N < 0.01%, 0.2W – 125W, 4Ω
- 90% Efficient Class-D Operation (4 Ω)
- Fully differential layout design for lowest noise and distortion
- Very Compact size(105mm*90mm*36.5mm – L*W*H)
- Additional power ON/OFF reset circuit for Pop noise suppression
- BTL configuration only for best audio performance
- AUX Power Supply Output(12V/0.2A) for DSP Pre Amplifier
- Single supply voltage range 24V~36V(UVP:24V)