Specification：
Bulb Size : H7/PX26d,High Low Dual Beam
Sealing way: SMD
Color temperature: 6000K White
Light color: white
Light body color: silver
External/Internal Drive: internal
Working Voltage: DC 12V to 24V
Chip: High Powered Light SourceApplication
Power: 55W/Bulb
Operating Temperature: -40°C~+80°C
Compared with halogen bulbs: Brighter 600%+
Light Source Model: CSP CHIPS UPGRADES
Application: For Motorcycle Headlights/ Electric Cars High Beam / Low Beam
Heat Dissipation: Theory Aviation aluminum 6063
Lumens: 20000 lumens per bulb,40000LM/pair,no blind zone
Lifespan: 60,000 working hours, stable quality, long service life
Cross Reference Number: H7/PX26d
CANBUS ERROR FREE: No. For most vehicles, just directly plug and play. Yet for some vehicles with CAN-BUS system, it may require install decoder or load resistor to avoid hyper flash or fast blinking.
The Bulbs are compatible with universal vehicles: Motorcycle,Motorbike,Bike,car, van, truck, pickup, SUV, bus, Wagon,UTB,off-road, ATV, dune buggy, forklift, tractor etc.(IF your plug type is same as it,it can fit your car.)

Features:
Effective Heat Dissipation & Sufficient Brightness:
The headlight bulbs adopt advanced SMD light sources,Built in constant IC can keep the current and voltage stable, EMC Anti-interference circuit design apply to most of Motorcycle and car models, 1:1 halogen’s light position with high illumination chips,the beam of light is focused on the road. With the characteristics of uniform light source and strong penetration, without black spots or shadow areas.Provides sufficient brightness and perfect beam pattern for night driving.

Long Lifespan:
No bulb filament structure design, the vehicle accusation circuit is not easy to oxidize,Full aviation aluminum shell. High efficient heat sink, no overheating to ensure the secure temperature range to reach 60,000+ working hours lifespan.

Package Include:
2 x H7/PX26d Headlight Bulb

Install Caution:
As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
Put the vehicle into park or make sure it is securely in gear.
Make sure to have the ignition turned off and the keys removed.
Be careful to avoid burns, especially when turning on or off the vehicles lighting.
Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.