UNI-T AC Circuit Breaker Finder and Tracer Tool Kit with Electrical Integrated GFCI Outlet Tester, AC 90-120V USA Plug + Adjustable Sensitivity Beeper Indicattion+ Flashing LED Light - UT25A

By using a transmitter and receiver, this circuit breaker finder quickly and easily identifies individual branch circuits at the panel box without interrupting power. It is the to accurately locate circuit breakers. They are compact in size and extremely easy to use.

Features:

1.Quickly and easily identify correct circuit breaker or , protecting a specific electrical circuit.

2.Sensitivity can be adjusted through the ON/OFF switch.

3.The operator can determine the status of circuit connection according to the 3 LEDs.

4.Features visual flashing light and an audible beeping to alert you when the correct breaker is identified.

5.It is convenient to test out whether the socket/plug is .

6.Professional tool for house, office, factory power network reconstruction, etc.

Product Specification for UT25A and UT25B

NCV working voltage ：80V(only for UT25B)

Operating voltage：90-120V

Operating frequency ：50-60Hz

Power：9VDC, battery type 1604/6F22

Operating temperature：41'F - 104 'F (5'C - 40'C)

Storage temperature：4'F - 140'F (-20'C - 60'C)

Operating humidity： at most 80% at temperature of 87'F (31 'C) to 50% at temperature of 104'F (40 'C) Storage

humidity： <80%

Operating altitude： 7000 feet (2000m) at most

Product weight： 133g (UT25A, UT25B) 80g (UT25A/B)

Product size： L:192xW:54xH:28mm (UT25A, UT25B)

                       L:103xW:56xH:30mm (UT25A/B)

Product certification： ETL

ETL list：ETL mark does not indicate the accuracy of estimated readings

Operations

Find the location of circuit breaker or circuit protector on the power frequency circuit loop, the transmitter will then send out a signal which will be received by the receiver. The receiver will detect this signal which is making beeping sounds, the exact position of circuit breaker or circuit protector can be found by adjusting the sensitivity.

1. Plug the receiver into a live socket; two green LEDs will shine.

2. Unscrew the sensitivity adjusting knob on the receiver from the close position to the highest position, the red LED will be turned on. If the red LED did not turn on, please change the battery. It is also necessary to change the battery if the NCV indicator light and line-tracking light are both blinking (only for UT25B).

3. During the testing process, when the receiver is close to the transmitter, the receiver will make beeping sounds and the LED will blink. UT25B (only) will firstly determine if there is electricity or not. If there is an AC voltage higher than 80V, the NCV indicator light will blink and make beeping sounds. When it detects signal sent out by the transmitter, it will automatically test the line-tracking function.

4. On the circuit breaker panel, adjust the sensitivity to the highest position, hold the receiver and detect from top to bottom, as shown in the figure above.

5. Along with the surface of circuit breaker, move the receiver until it detects the portion of interest.

6. When moving the receiver, the sensitivity can be reduced to find the exact circuit breaker of interest.

Package Included:

1 x Circuit Breaker Finder (Receiver)

1 x Socket Tester (Transmitter)

1 x User Manual