Product Features:
 
✨Fine workmanship & good performance.The plastic handle cordless soldering iron is fine workmanship, durable.

✨Compact size and Portable.DIY player can carry pocket gas welding torch, It is convenient to carry,DIY tools can be welded and repaired.

✨Easy to Use:Soldering iron temperature 450 degree ,Flame temperature 1300 degree, and the temperature can be adjusted.Filling capacity is 8ml, the use time can reach 35-45 minutes.
 
 
 
 
Product Specification:
Material:Plastic + Metal
Filling capacity:8ML
Color:Green
Temperature:Flame temperature 1300 degree (adjustable)
Soldering iron temperature:450 degree (adjustable)
Use fuel:Pure butane
Use time:35-45 minutes
Length:Approx. 13cm / 5.12inch
Weight:Approx. 208g
Fuel used: Pure butane GAS (This gas soldering iron does not come with automatic ignition and requires a igniter to ignite.)
 
 
 
Package included:
14Pcs Gas Butane Soldering Iron Torch Pen Cordless Welding Solder Burner Tool Kit
 
 
 
Application:
✅1. Relaxation rust metal screw kit, laboratory heating study, kitchen baking tool, factory equipment maintenance.
 
✅2. Welding Automobile, truck aviation repair Hydropower engineering repair.
 
✅3. Electrical appliances, motor control box maintenance, welding, etc.
 
✅4. Wires Circuit board repair welding, IC board welding repair, home field line welding, and repair
 
✅5. Soldering on the components, etc.
 
✅6.Jewelry, glasses industry maintenance, plastic cutting
 
✅7.DIY player can carry pocket gas welding torch, small and convenient to carry, DIY tools can be welded and repaired.
 
 
 
How to use:
 
1、 Fill gas
1. Fill with gas and confirm that the switch is turned off before supplementing.
2. Guide the gas canister into the air inlet and inflate it by pressing down.
3. About 10 seconds, it can be filled with gas. Wait for a few minutes until the gas stabilizes before use.
4. If there is a hissing sound from the tail after gas is injected, press a pen tip slightly into the air outlet to eliminate it.
 
2、 Ignite
1. Replace the soldering iron tip
2. Push the switch to the ON position and hear a hissing sound
3. Push the electronic switch to ignite.
4. After ignition, burn for 3 minutes until the fire subsides, and the soldering iron tip will continue to heat up.
5. Adjust the flame size;
6. This product has a temperature of up to 1300 degrees (with a soldering iron temperature of 450 degrees). Please pay attention to safety when using it and turn off the switch to the OFF position after use.
7. When using a gas soldering iron, please pay special attention to waiting until the flame is completely eliminated and the object inside the iron turns red before operating to extend the life of the soldering iron tip.
 
 
3、 Attention:
1. Replace the connector, please wait for it to cool down before replacing or replace it in advance.
2. The soldering iron tip in use is hot and hot, please do not touch it with your hands.
3. The adjustment button can control the gas output and temperature, usually placed in the middle position.
4. After use, wait for it to cool down before storing. Do not place it in high temperature or direct sunlight.
5. Children should not use it, and it should be placed properly when collecting.
6. Please fill with high-quality canned gas and keep away from sources of ignition during filling.
7. It is necessary to regularly clean the nozzle due to the presence or absence of some slag in the gas.
8. When cleaning, press and spray the nozzle on the gas tank outlet to achieve the cleaning effect.
9. Avoid heavy falls.
 
 
 
Note：
 
The gas soldering iron should not be inflated by more than two-thirds, as it may cause nozzle blockage and affect its use.
 
1. Gas is not included, you need to buy gas locally, and then fill into the soldering iron.
Before shipment, it will be tested and there may be a slight residual gas, which does not affect its use!
 
2. This item is not auto-ignite so you need to use your own fire source to start it.
 
 

On Apr 13, 2025 at 20:43:40 PDT, seller added the following information:

DataCaciques